![]() |
blower switch diagram?
Im having trouble with my heater blower switch- basically it doesnt work. I was wondering if i could get someone to post a wiring diagram for it or help me dissolve this problem.
I have a non AC truck; the switch has 4 prongs on the back of it, but the harness only has three receptors Im not getting any juice (i dont think) to the harness |
Re: blower switch diagram?
1 Attachment(s)
This is what the harness looks like that plugs into the switch- am i missing a female spade i one of these holes?
|
Re: blower switch diagram?
These came out of a 76 wiring -10. Im pretty sure they are wired the same. But i hope this helps!
http://i18.photobucket.com/albums/b1...werdiagram.jpg http://i18.photobucket.com/albums/b1...heaterscan.jpg |
Re: blower switch diagram?
ill se what i can do- THANKS for the quick response
|
Re: blower switch diagram?
ALSO- what is the best way to remove the cables that direct the airflow/temp? they seem to be riveted on, or have some clip holding them
|
Re: blower switch diagram?
Are you talking about the cable that goes to the heater core flap on the back of the control? Well, if you are, then all you do is take some needle nose pliers, and pull up on that little china hat looking deal, but dont bent it, because you can re use those
|
Re: blower switch diagram?
got it done. They were a pain to get off but i flattened them back out with pliers and reused them- THANKS
|
All times are GMT -4. The time now is 12:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com