72 1 Ton Rolling Frame.
 

It's a 157" that's been lengthened around 24". I have the rear drums and hardware. It comes just as you see it w/4speed trans. It supposedly has 40k on the frame and suspension,but has been sitting outsine for a while. $450 OBO. It does need to be plated on the ext. if you leave it that way. I do have the wheels which are split rims.

Re: 72 1 Ton Rolling Frame.
 

Few more.

Re: 72 1 Ton Rolling Frame.
 

Bump.

Re: 72 1 Ton Rolling Frame.
 

Bump.

Re: 72 1 Ton Rolling Frame.
 

Any parts before I cut it up?

Re: 72 1 Ton Rolling Frame.
 

How much for the rear upper shock mounts? Shipped to 45344?

Re: 72 1 Ton Rolling Frame.
 

how much for the clutch zbar frame bracket shipped to 94538, CA. do you know what size engine was in this frame? thanks, jake

Re: 72 1 Ton Rolling Frame.
 

It was a 402.

Re: 72 1 Ton Rolling Frame.
 

$20 each shipped for shock mounts and z-bar frame bracket.

Re: 72 1 Ton Rolling Frame.
 

pm sent for the z-bar bracket.

Re: 72 1 Ton Rolling Frame.
 

Uncle, I'll have to pass for now. Something came up and money is needed elsewhere. Thanx for you response.

Re: 72 1 Ton Rolling Frame.
 

bracket recieved. no torch or grind marks! i'm very happy. thank you, jake

Re: 72 1 Ton Rolling Frame.
 

I need the front two hub/rotors. Do you still have these? I have cracks in both of mine. I could come get them as close as you are. Thanks. Also, how much?

Re: 72 1 Ton Rolling Frame.
 

I'll check ,but I think they are bad. They are the same from 71-90 I think.

Re: 72 1 Ton Rolling Frame.
 

I just checked. They are 1.5 inches thick. The 71-72 are 1.3 inches. As long as they are not cracked, with the low miles, they should work. Thanks.

Re: 72 1 Ton Rolling Frame.
 

Sorry,but the rotors are shot. Looks like someone forgot to change the pads for years. Both have deep grooves.