The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Some stuff for sale - mostly commonly swapped stuff (https://67-72chevytrucks.com/vboard/showthread.php?t=290130)

Bowtie001 05-02-2008 04:28 AM

Some stuff for sale - mostly commonly swapped stuff
 
OK everyone, I have a few things I am in the process of swapping out for sale. Undesirable is one way to put it, but another is cheap spare working parts!

For some reason I decided to swap transmissions, which may or may not have been a good idea. In the end I ended up with an EXCELLENT three speed and column shift levers just SITTING THERE while my NEW transmission sits in the truck and generally doesn't shift right and makes tons of noise, but that's neither here nor there, what needs to happen is that old GOOD transmission needs to disappear before I change my mind and put it back in. I'll even throw the bell in, even though I kind of want it. How does $50 sound?

For an obvious reason I took out the old bench seat. Let me be very clear, it's not like most seats where the vinyl is torn, or ripped, or flaking off, or dirty even... it's just not there. Not at all! I was driving around with the "Indian Blanket" style cover on foam for a long time because the PO thought, "hey, duct tape is like vinyl..." you get the idea. No more tape - I even vaccuumed it nicely and now it's time for a new style seat. $20 takes it.

Old gas tank - behind the seat style. The wife freaked out, and the new seat likely won't fit with the seat in there - and there certainly isn't any room for speakers. Now, being in the cab there is no rust at all. I think it worked great except the cap never seemed to seal right. I'll include all hard lines too. Just give me enough time to drain it and take it out of the truck. Call this one $25.

Drivers quality door handles. Nothing really interesting to write here. $10 takes them both and one window handle.

Seat belts - complete and blue. $15 takes them all.

I also have a few oscilloscopes if anyone wants. That's vaguely sorta, I think. They work too. $200 a piece. Yeah, I am serious. Weird, huh?

Nothing ships, I am in Greer, SC. Come and get it, or whatever. To keep it fair let's keep it out of the PM area.

Thanks guys.
-Brian

Bowtie001 05-05-2008 02:08 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
ttt... anyone? Prices are neg.

clean67 05-05-2008 02:55 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Would it be possible to see a pic of the scopes.
Thanks greg

CJ5 Convert 05-05-2008 10:08 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
I just wanna know why you would have oscilliscopes. I couldnt help but ask. :lol:

Longhorn Man 05-05-2008 05:29 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
my thoughts too... why would you have those?

Can you get photos of the door handles? I am very interested.

Longhorn321 05-05-2008 06:53 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
I would like to come and look at the seat and gas tank. I'm in Lyman, so just about anytime would be fine except for that old pesky job thing. Let me know.

Bowtie001 05-06-2008 02:19 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
OK, in reverse order:
Anytime early this week after around six would be fine LongHorn321. - PM me for address.
Longhorn man - I will have those pictures on this thread before the days end.

clean67, I will also do the same with the scopes.

All, I bought them from an auction at work. I thought seriously that I might use them, but it turns out toys that help me get to work are better than toys that I have no real reason to own.

-Brian

mrein3 05-06-2008 02:25 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Quote:

Originally Posted by Longhorn Man (Post 2708178)
my thoughts too... why would you have those?

Other than using them here in the lab where I work, the shop I used to work at had an o-scope for doing tune-ups.

LONG before on-board diagnostics.

Bowtie001 05-07-2008 04:25 AM

Re: Some stuff for sale - Seat, Belts, Tank, Handles, Levers and Oscilloscopes
 
Wow, OK all of my pictures are way too big. Please PM me E-mail addresses and I will forward pics...

-Brian

Bowtie001 05-07-2008 04:27 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Also, I have a set of blue drivers quality belts for sale - $25 takes them all.

Longhorn Man 05-07-2008 05:12 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
cockroach93 at yahoo.com (Unlinked for spam reasons)

Bowtie001 05-07-2008 01:16 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
E-mail sent.

Bowtie001 05-07-2008 02:53 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
When Longhorn 321 was checking the tank and seat out yesterday he noted three things I should share:
Seat has good foam
Tank has been previously patched
Tank has vented filler tube

The tank, to the best of my knowledge, did not leak. It smelled until I shoved a "gasket" onto the filler cap, and then never smelled again. I drove it for about a year like that.

Bowtie001 05-08-2008 10:43 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
TTT plus I didn't get an E-mail about where to send the O-scope pics.

Someone take this stuff or it's going in the garbage.

Longhorn Man 05-09-2008 01:30 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Hey, I just looked at the e-mail... I'll have to pass, thanks.

Bowtie001 05-10-2008 01:34 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Nobody wants this stuff? I hate to throw it away, but that's what will happen...

nds1968 05-18-2008 02:58 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Can you post some pics of the seat belts. I need the plastic for the retractors. Will you ship to Pittsburgh.

Thanks Nate

Bowtie001 05-18-2008 02:45 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
1 Attachment(s)
I will ship wherever you want in the US.

There is another belt (obviously) that was not out of the truck at the time. I assure you the plastic and everything is the same as this one.


-Brian

Conroe trucker 05-20-2008 05:28 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
I have a 67 6 cyl with a 3 spd nonsynchro first gear. It has the small side cover.

I have replaced it with a 3 spd synchro first gear. It has the big side cover. Actually it is a 3spd OD, but that does not matter for this.

My issue is, do you know if the shift linkage from the column to the shifter shaft link is the same?
The shifter shaft link is different, the nonsynchro has a much longer shaft than the synchro, so I now need the synchro's shift linkage.

I am looking for inlightenment.
Pictures are available if you need them.

Thanks,
Massingill

Bowtie001 05-20-2008 01:52 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Gosh, I have no idea if they are the same or not. Mine is disassembled so pictures will only help if you want to measure and everything. Maybe someone on the board could help?
-Brian

Bowtie001 06-12-2008 11:23 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
ttt

1971ChevyTruck 06-14-2008 03:07 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Do you still have the door handles??

Bowtie001 06-25-2008 03:30 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Yes sir, I could send you pictures if you give me an E-mail.

1971ChevyTruck 06-25-2008 09:33 PM

Re: Some stuff for sale - mostly commonly swapped stuff
 
chevytruck@grics.net

Bowtie001 06-28-2008 09:51 AM

Re: Some stuff for sale - mostly commonly swapped stuff
 
Pictures sent this morning.


All times are GMT -4. The time now is 07:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com