The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Stock Fan Clutch Info. Needed (https://67-72chevytrucks.com/vboard/showthread.php?t=320455)

Rack Man

12-24-2008 03:41 AM

Stock Fan Clutch Info. Needed

Got a couple questions regarding stock fan clutches...

1. Did all our trucks come stock w/fan clutches...or maybe just AC trucks?
2. What diameter fan & how many blades is recommended for an AC truck w/stock shroud?

I will be putting in a Vintage Air system and just realized that the fan I just sent to the powder-coaters is probably not gonna work....as it is a clutchless type....

Thanks in advance!

Dan

El Jay

12-24-2008 04:27 AM

Re: Stock Fan Clutch Info. Needed

My '72 GMC, 402, with A/C has a clutch fan.

The fan is approximately 18" in diameter, with 6 blades, in a factory shroud.

I'm afraid I can't do much better than that right now. It's dark, after midnight, I was reading the tape measure while holding a flashlight, & it's sprinkling (fortunately, not raining).

If I can help you later on, after sunrise, just give me a holler & I'll go back & better look @ things for you.

Andy4639

12-24-2008 10:20 AM

Re: Stock Fan Clutch Info. Needed

A/C trucks all came with the clutch fans. Mine is a 7 blade that measures 17.5" across from blade tip to tip.
Make sure the blades aren't bent at all or you will be buying water pumps on a regular bases.

msgross

12-24-2008 10:32 AM

Re: Stock Fan Clutch Info. Needed

I have one that might work for you...

Stocker

12-24-2008 10:46 AM

Re: Stock Fan Clutch Info. Needed

My '72 w/factory air has a 7-blade fan.... iirc, it's about 18" diameter. I'll try to remember to check it after the sun comes up, if there's not too much snow on the hood...

All times are GMT -4. The time now is 06:12 PM.