The 1947 - Present Chevrolet & GMC Truck Message Board Network

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - 72 k10 4x4 front shaft (https://67-72chevytrucks.com/vboard/showthread.php?t=324745)

socal

01-20-2009 09:58 AM

72 k10 4x4 front shaft

will the front shaft of a 77 blazer fit my 72 k10? if not what shaft will fit in my th350/205 transfer case?

Mike C

01-22-2009 09:35 PM

Re: 72 k10 4x4 front shaft

Maybe. Probably not the answer you are looking for. You need to measure the two then you can make the decision.

Cyclone

01-22-2009 09:39 PM

Re: 72 k10 4x4 front shaft

Quote:

Originally Posted by socal (Post 3097183)

will the front shaft of a 77 blazer fit my 72 k10? if not what shaft will fit in my th350/205 transfer case?

I have a used 72 shaft , $65. plus shipping from NorCal.
Are you running any lift? How much?
What style output on your 205?

http://i14.photobucket.com/albums/a3...eshafts205.jpg

socal

01-23-2009 05:58 PM

Re: 72 k10 4x4 front shaft

3 Attachment(s)

socal

01-23-2009 08:24 PM

Re: 72 k10 4x4 front shaft

1 Attachment(s)

Here is the pic of the t/c side
Attachment 423866

Cyclone

01-23-2009 08:37 PM

Re: 72 k10 4x4 front shaft

Are those holes in the yoke threaded?

socal

01-23-2009 08:50 PM

Re: 72 k10 4x4 front shaft

No they are no, Same as the axle side 2 threaded clamps with a 1/2 inch nut.

Cyclone

01-23-2009 09:07 PM

Re: 72 k10 4x4 front shaft

OK, the red one in my pic above will work then, I'll get a cost from UPS.

socal

01-23-2009 09:09 PM

Re: 72 k10 4x4 front shaft

thanks C, pm me when you do

All times are GMT -4. The time now is 09:13 AM.