WTB - TH400 Yoke
 

Looking for a Turbo 400 yoke for the larger seal, yoke should measuere about 1 7/8 in. in diameter. Let me know - Thanks.

Re: WTB - TH400 Yoke
 

Are you wanting one with outside clip u-joint or inside clip (C-clip)? (our trucks originally used outside clips) I have both.
$40.00 ea shipped

Re: WTB - TH400 Yoke
 

I would prefer the usual outside clip style. How long is it from the ujoint center to the end ? Ujoint cup should be 1 1/16, 1310 style joint. Do you have a pic ? Thanks.

Re: WTB - TH400 Yoke
 

yes they are 1310 series with 1 1/16 caps.. I will measure length and snap you a picture tomorrow while at the shop.

Re: WTB - TH400 Yoke
 

Thanks, just want to verify that it is for the large seal, should be a hair over 1 7/8 or 1.885. I've already bought one for the smaller seal, just want to be sure this time. Anybody need a yoke for a Th400 - 1 11/16 size ?

Re: WTB - TH400 Yoke
 

Here are pics of the two that I have for a large seal.. both have the same size u-joint cap.. There is also a picture of the small seal one for reference.. they all have the same size cap.. the two large seal ones are wider than the small seal one..

Re: WTB - TH400 Yoke
 

more pics

Re: WTB - TH400 Yoke
 

Thanks, great pics and measurements. The diameter on the fat ones is right, but it looks like they use the 1320 joint ? Maybe I'm looking for hens teeth, but isn't there a large seal yoke for the smaller joint ?

Re: WTB - TH400 Yoke
 

Your welcome!!
All of my T400 large seal yokes are the wider 1330 u-joint with 1 1/16" diameter caps or GM 3R. (inside clip) with 1 1/8"th caps

I did find this place that lists a T400 with 1310 u-joints...

http://www.dennysdriveshaft.com/c75_general_motors.html

Re: WTB - TH400 Yoke
 

Yeah, I meant 1330, not 1320. Anyway, thanks for the link, kind of spendy, but new may the easiest way to get it done. Thanks for your help !