The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   99-05 bucket seats (https://67-72chevytrucks.com/vboard/showthread.php?t=328550)

og350 02-13-2009 12:14 AM

99-05 bucket seats
 
i got a set of 2005 silverado seats with the flip down center for cheap from a friend at the junk yard. I am wondering if anyone has pictures of them installed or mounting advice on putting them into a 71 with a stock bench. thanks!!

og350 02-17-2009 09:01 PM

Re: 99-05 bucket seats
 
i know someone has to have some of these!

jbristo67 02-17-2009 09:03 PM

Re: 99-05 bucket seats
 
I want some does that count.

og350 02-17-2009 09:08 PM

Re: 99-05 bucket seats
 
well its a good start! it was hard to find a good set with the flip down center seat!

tk-mpl 02-17-2009 11:25 PM

Re: 99-05 bucket seats
 
I would show you mine, but not completely done yet. I just made some 2.5"x4" plates up and will weld them to the floor to made it stronger around eack bolt hole.. For fitment I just made a plywood template of the base and drilled holes. They fit pretty good. Going to have to shorten the steering column though.

jugernot 02-18-2009 12:14 AM

Re: 99-05 bucket seats
 
2 Attachment(s)
There are some pic of my 2005 seats installed and the fabricated mounts under the cab. Is this what you are looking for?

project1971 02-18-2009 10:05 AM

Re: 99-05 bucket seats
 
fantastic! i have a set waiting to go in and was wonders how easy it was going to be. that doesn't look bad at all.

og350 02-23-2009 10:50 PM

Re: 99-05 bucket seats
 
Quote:

Originally Posted by jugernot (Post 3151022)
There are some pic of my 2005 seats installed and the fabricated mounts under the cab. Is this what you are looking for?

that is perfect!! thanks for posting that for me.i hope to get to installing my set soon!!

Ackattack 02-23-2009 11:20 PM

Re: 99-05 bucket seats
 
yep, not too bad. Just make sure that you make some plates to go on the bottom of the cab.

I think I got some Grade 8 7/16" bolts to mount mine up.

og350 02-25-2009 01:04 AM

Re: 99-05 bucket seats
 
do these seats take up alot of cab room with the stock gas tank still in the cab?

rambler 02-25-2009 03:27 AM

Re: 99-05 bucket seats
 
I think most people pull the cab tanks and put one under the bed for these seats... or you will be hugging the steering wheel.

jamieg 02-25-2009 06:05 PM

Re: 99-05 bucket seats
 
i was thinking about doing this as well. I would also like to see more pics of this and what reinforcements would/should be adequate.

I have heard also that this year of seat leaves a little to be desired for legroom as the seat is a bit thick.

I have been looking at new 09 seats and they seem a lot thinner, and i would just buy factory shoulder harness for a seatbelt to minimize extra work for seat reinforcment.

any more info?

jugernot 02-25-2009 09:02 PM

Re: 99-05 bucket seats
 
Quote:

Originally Posted by og350 (Post 3162540)
that is perfect!! thanks for posting that for me.i hope to get to installing my set soon!!

The only warning I have to say is that if you are a tall person you might not have alot of head room. I'm 5'8 and fit perfectly, but feel like I'm sitting tall inside.


All times are GMT -4. The time now is 12:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com