![]() |
front leafs
i have springs out of an 87 blazer that came on my k10, are these good springs to be running or should i replace them?
also is there anything that is different about these springs(like witdh, length) compared to the stock 68 leafs that they replaced? just trying to learn as much as i can, and also make sure that everything is safely done thnks nate |
Re: front leafs
I believe the 87 are 47 inches long and the 67 to 72 are 44 inches long
|
Re: front leafs
if you put them in the front you can get like 4.5 iches of lift i wouold leave them and just cut the hell out out of your wells
|
Re: front leafs
they are in the front, what would cutting the wells do? im not planing on doing that serious of off roading
|
Re: front leafs
how long are the sotck shackles for a 68 k10 suposed to be i measuered the ones that came on my truck are 6.5" long and are 1/4" think, i personaly think they are homemade wil put up a picture tomorow
what does puting a longer shackle acomplish? does it lift the truck? also is a 6.5" long by 1/4" thick a safe shackle or hould i replace them with ones from diy4x this truck is not going to be a serious offroader but it will offroad quite a bit and will need to be strong and safe as it will also be my daily driver thanks nate |
Re: front leafs
i think it should be safe for mild wheeling and driving because diy4 has them 6in but it's 3/8
|
Re: front leafs
i think it should be safe for mild wheeling and driving because diy4 has them 6in but it's 3/8
|
Re: front leafs
i decided to replace them with 6"ers from diy4x being as when i took them off and cleaned them up i found stress fractures
|
Re: front leafs
I'm glad you checked it then you changed it because you found something wrong and didnt wait till it broke
|
All times are GMT -4. The time now is 04:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com