The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Power Steering on 67'? (https://67-72chevytrucks.com/vboard/showthread.php?t=333890)

sourkraut

03-16-2009 09:24 PM

Power Steering on 67'?

Does anybody know the measurement between the power steering box and the frame? I plan on putting power steering on the truck and need to make the bracket. I know that different companies have them available but that would be to easy! I am trying to do or make as much as I can myself.

Mondo

03-17-2009 04:50 PM

Re: Power Steering on 67'?

I thought it bolted straight to the frame... on most 67s there's a dimple that needs to be made in the frame to allow the box to bolt directly.

psychobilly451

03-17-2009 05:10 PM

Re: Power Steering on 67'?

I hope i don't side track the thread too much but....

Where does one find (rebuild) parts for the ram assist power steering?

sourkraut

03-17-2009 07:52 PM

Re: Power Steering on 67'?

Quote:

Originally Posted by Mondo (Post 3203061)

I thought it bolted straight to the frame... on most 67s there's a dimple that needs to be made in the frame to allow the box to bolt directly.

you are 100% correct! I had did some research today and found that out. I have seen all the spacer/bracket advertised and thought I would have to move it out a little. but as you said I will have to dimple/releive the frame so it will fit flush on the frame. thanks, Mondo!

All times are GMT -4. The time now is 12:30 PM.