The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   external to internal regulation conversion question (https://67-72chevytrucks.com/vboard/showthread.php?t=334241)

elektrik 03-18-2009 05:24 PM

external to internal regulation conversion question
 
quick question all: going to convert from external to internal regulation for my 69 using a guide + tips I found here. The question is: do I have to worry about 'overcharging' the battery if I convert?

Thanks

Camper Power 03-18-2009 08:41 PM

Re: external to internal regulation conversion question
 
if you hook it up properly you wont have to worry about a thing. now if you hook it up like a one wire alternator like the po did to my truck thats another story. if you havent read this http://67-72chevytrucks.com/vboard/s...d.php?t=119379 then i suggest you do, its how i rewired the harness for the alternator to stop overcharging.

1968SWBBigBlock 03-18-2009 08:46 PM

Re: external to internal regulation conversion question
 
I assume this would not apply if you converted over to a 1 wire internal voltage regulator - if you converted to a 1 wire you can just cut the wire at the voltage regulator correct?


All times are GMT -4. The time now is 05:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com