The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Weiand or Edelbrock intake for BB? (https://67-72chevytrucks.com/vboard/showthread.php?t=335681)

So.Cal.Super 03-26-2009 03:11 PM

Weiand or Edelbrock intake for BB?
 
In case anyones wondering i have a few threads going as I am researching parts (thanks to the board and its members) for some repairs / upgrades I am doing.

Since I am replacing the cam and lifters I figured I would put a new intake on as well. I am running a q-jet so I am looking at the Weiand street warrior dual plane or the similar in the edelbrock. curious if anyone has used one or the other.

this is for a 402 BB

thanks

1970 CST Short Wide 03-26-2009 04:54 PM

Re: Weiand or Edelbrock intake for BB?
 
My 454 loves the Edelbrock Air Gap

BCOWANWHEELS 03-26-2009 05:42 PM

Re: Weiand or Edelbrock intake for BB?
 
Intake needs to match the cam rpm range

1968SWBBigBlock 03-26-2009 08:52 PM

Re: Weiand or Edelbrock intake for BB?
 
I agree with BCOWANWHEELS - what cam are you running
FWIW the Edelbrock is made in the USA VS overseas for the Wieand

spinning wheels 03-26-2009 08:58 PM

Re: Weiand or Edelbrock intake for BB?
 
Quote:

Originally Posted by So.Cal.Super (Post 3220777)
In case anyones wondering i have a few threads going as I am researching parts (thanks to the board and its members) for some repairs / upgrades I am doing.

Since I am replacing the cam and lifters I figured I would put a new intake on as well. I am running a q-jet so I am looking at the Weiand street warrior dual plane or the similar in the edelbrock. curious if anyone has used one or the other.

this is for a 402 BB

thanks

How big and what duration is the new bump stick?

So.Cal.Super 03-26-2009 09:17 PM

Re: Weiand or Edelbrock intake for BB?
 
Per Edelbrocks Recomendation

Part Number: EDL-2162
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: Idle-5,500
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 228
Duration at 050 inch Lift: 218 int./228 exh.
Advertised Intake Duration: 292
Advertised Exhaust Duration: 302
Advertised Duration: 292 int./302 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.500 exh. lift
Lobe Separation (degrees): 114
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet

This is still my daily driver so and I am not getting into head work etc.

So my choices for intakes 1 from there tech support and 1 from weiand.

Edelbrock

Part Number: EDL-2161
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Natural
Intake Material: Aluminum
EGR: No

and

Weiand

Part Number: WND-8123
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Natural
Intake Material: Aluminum
EGR: No


Thanks for the input!

So.Cal.Super 03-26-2009 09:22 PM

Re: Weiand or Edelbrock intake for BB?
 
Quote:

Originally Posted by 1968SWBBigBlock (Post 3221250)
I agree with BCOWANWHEELS - what cam are you running
FWIW the Edelbrock is made in the USA VS overseas for the Wieand

Weiand is overseas? Its owned by Holley and I thought made in KY?


All times are GMT -4. The time now is 02:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com