Want to buy: front frame crossmember (under radiator)
 

My front radiator support crossmember on my 63 is flat messed up. I'd like to buy a good straight one.

Re: Want to buy: front frame crossmember (under radiator)
 

With or without radiator cradles? 2 core or 4 core radiator? I have all of the above. $50.00 shipped. Let me know if I can help and thanks for the opportunity.

Re: Want to buy: front frame crossmember (under radiator)
 

I appreciate your quick response.

I will need to figure out exactly what I need. I do know that I am putting my engine in the forward set of mount holes, similar to 67-72 models. So, I guess I will need to have the higher, front radiator mounts. I'm pretty sure I will need both lower saddles and the upper retainer too.

Tell me how to measure my radiator and I will get more specifics to help us decide.

Re: Want to buy: front frame crossmember (under radiator)
 

Kevin:

To determine the size of your radiator, take off the cap and count the number of rows of cores (small holes in the top) and also measure the width of the top and bottom tank. This will determine the lower tank cradles and the top radiator mount size. After you determine the radiator size, I will figure out which parts you need and reply accordinly.

Thanks fo the opportunity and let me know if I can help you with these items or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Want to buy: front frame crossmember (under radiator)
 

I believe their are some of these at Little John's Junk yard 121 and Carson or AB's on Riverside and 30

Re: Want to buy: front frame crossmember (under radiator)
 

I also have one

Re: Want to buy: front frame crossmember (under radiator)
 

I am also looking for front frame crossmember

Re: Want to buy: front frame crossmember (under radiator)
 

It is for 1965 c10