![]() |
How to remove lower control arm shafts?
I had a buddy give me some lower control arms with the bumps stop brackets shaved off. They still have the original shaft in them. I'd like to swap the old shafts for new ones. How do you remove the shaft from the lower control arm?
Thanks in advance for the help.:ito: |
Re: How to remove lower control arm shafts?
If its SLA like mine you just unscrew the end caps and slide it out. When you put them back in don't just tighten them down. They need to be adjusted. You can move the control arm foward or backward on the shaft. I just centered mine up.
|
Re: How to remove lower control arm shafts?
Quote:
|
Re: How to remove lower control arm shafts?
I had to put a big a$$ wrench on it and kick the chet out of it.
|
Re: How to remove lower control arm shafts?
I took mine apart off the truck and my buddy and I used 3/4'' drive ratchet to take em apart. We were both standing on diferent ends trying to break it loose like this......:uhmk:..
|
| All times are GMT -4. The time now is 06:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com