The 1947 - Present Chevrolet & GMC Truck Message Board Network

Quote:

Originally Posted by Ryan6838 (Post 3428568)

I picked up some spindles, calipers and disks of a 73-87 pickup. What parts do i need to make them work on my 68 c10? I heard that i can use my arms i just need a few parts.

Lower BJ's for a 73-87

Upper BJ's for 73-87

Draglink & tie rods from a 73-87 or tie-rod to spindle adapters

Master cyl from a 71-80

pwr booster from a 71-72 (if power brakes)

Prop valve from a disc brake equipped truck: 71-72 (if mounting @ the master cyl) or 73-80 (if mounting @ the splash apron in the engine compartment)

Hard brake lines from a disc brake equipped truck: 71-72 (if mounting @ the master cyl) or 73-80 (if mounting @ the splash apron in the engine compartment)

The brake 'push' rod that connects the pedal to the pivot linkage on the firewall may need to be extended (my manual drum brake 68 required extending the rod when I swapped to 73-80 power discs)