The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   need help with hei rotor (https://67-72chevytrucks.com/vboard/showthread.php?t=356824)

glenb 08-08-2009 06:20 PM

need help with hei rotor
 
Hey there im new to this.Picked up a 80 scottsdale 350/400/. when throttle is wide open, 4bbl kicks in but the engine is surging. can smell gas afterword.any ideas? also how do you get at the rotor to change it. Thanks

jd74c-10 08-11-2009 03:51 PM

Re: need help with hei rotor
 
there is a adjustment on the right side of the quadrajet secondary to adjust the tension on the top butterfly .when the butterfly opens it lifts the needles out of the main jets, when the tension isn't right the needles won't drop back in the jets and close off the secondary fuel. that could be your surging and fuel smell. check to see if the top butterfly close's freely when you open it by hand. to get to the rotor remove the distributer cap and there it is. hope this helps Jim

msgross 08-11-2009 03:52 PM

Re: need help with hei rotor
 
cap comes off with four screw J-clamps located near the base of the cap. Make sure it goes back on the right way though..


All times are GMT -4. The time now is 05:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com