Rear swaybar setup off of 91 4x4 Burb $50
 

Bought a burb for the differentials and now I dont need them, it has an rear aftermarket sway bar w/polyurethane bushings.

50 Bucks plus the ride.

M.O. or cash accepted.

Fedex shipped.

Pics upon request

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

im interested, pics?

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

2nd in line, price shipped to 80134 thanks

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

This is the best pic I could get tonight. Will get better ones tomorrow when I take it off.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

More pics, looks to be about 1 1/8 inch diameter sway bar.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

59.62 shipped to 80134 Fedex Ground estimate

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

put me next in line...shipped to 29151

thanks...Chuck.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

It does look like a decent piece but im out. Adam, your next in line.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

Chuck, looks like it's down to you. cochino passed because he has a 2wd truck. I'll get you a quote as soon as I find a box that the sway bar will fit in.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

it's a rear sway bar so it should fit on a 2wd...that's what I have also...I just assumed it would fit....do we know for sure it won't fit on a 10 bolt?

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

Keep in mind Adam had a 70's Blazer (12 bolt), and a flip kit to boot. I doubt it would work for his application.

You also have to figure, if this is a bolt on for a 4wd truck, it might not bolt up to a 2wd truck...springs and ride height are different.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

have an 84 4wd and would buy this ASAP

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

Not really familiar with 2wd vs 4wd suburban frame differences? All I know is that the brackets mount directly to the frame, and if a 2wd is any wider or narrower than a 4wd it will not work. Experts??? BTW it was mounted on a 10 bolt.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

If Fathoe can't use it you are up next.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

can you measure where it mounted between the frame rails and tell me where you measured at and I'll take measurements also...that'll solve the dilemma ...thanks

or on second thought, you could just measure the bar and show me a picture where it mounts...then I can see if it'll work...thanks man

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

"Anything will work if ya let it"-Travis W. Redfish, Roadie 1980

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

34 inches wide where the brackets mount to the frame.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

Chuck shipping to 29151 is 32.36, so total is 82.36

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

let me measure my truck and we'll see what it is...thanks

Chuck.

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

scratch that idea...I don't think it'll fit on a 1/2ton swb frame...

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

Looks like I am interested . Shipping to a business address in Bryan, Tx 77808 please .
Frank

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

Looks like shipping to 77808 is 18.83

so 68.83 total Fedex Ground

Waiting to hear back from Jmac11 pm sent

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

are you putting this on a 1/2 ton frame? if so, I wish I knew how...also that I probably passed up a smokin deal...

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

This setup came off a 1/2 ton 4wd truck w/ a 10 bolt. I assumed you couldnt use it because your truck is a 2wd?

Re: Rear swaybar setup off of 91 4x4 Burb $50
 

It should work just fine on a 2wd, the frames are the same at the rear. BUT, the spring hangers are a different height between 4wd and 2wd, so the end links may need changed to a slightly different length. Not sure if it would work on a lowered truck though.