![]() |
Need help t-5 5 speed trans
Ok i got a 400 ci small block and a t-5 out of a 87 trans am for free that my friend just got because i talked the price down by half for the car "My friend wanted the bolt in ford 9 inch out of it for his 86 ta" So how do i know if it is a v8 trans the number on it is WG 13-52-157 Thanks Jeff
|
Re: Need help t-5 5 speed trans
ttt anyone??
|
Re: Need help t-5 5 speed trans
Honestly, it won't matter. I've seen 290hp 350's destroy V8 T5's. They're notoriously weak. Even a "World Class" Mustang T5's won't live long behind a torquey small block. All that said, yes yours is a V8 T5.
1352-157 GMC 1986 V8 F Cars V8 LG4-LG9 U 2.76 2.95 1.94 1.34 1.00 0.63 Here's your id guide. T5 ID Guide |
Re: Need help t-5 5 speed trans
I have personal experience with those weak tranny's. had one in my 66 short step side with a 350hp small block. the trans went out in two months. these trucks are to heavy and as stated above 290hp or up and they crumble.
|
Re: Need help t-5 5 speed trans
Behind a 400 in a truck it won't last a week.
GM wouldn't even allow you to order the TPI 350 with the T-5. It is just plain a weak trans. I went through a pile of T-5's in my 83 Z/28 and it only weighed 3400 pounds and had a mild 305. Now imagine the torque of a 400 and a 4000+ pound truck. |
Re: Need help t-5 5 speed trans
It will not have the 400 in it but worse I have a very strong 355 I had built for my 2wd 81 blazer I was thinking t-5 instead of th400 than put 4.56 in the rear and not the 3.73/4.11 I want
|
Re: Need help t-5 5 speed trans
Quote:
The double overdrive is pretty nice too. My 98 Camaro had the T-56. After I put in 4.10 gears I was still only at 1900 RPM at 70 mph in 6th with tires that were under 26" tall. |
Re: Need help t-5 5 speed trans
dont do it . my buddy has a 400 with a t5 and blew the bottom of the case apart, we have it down to a science to change, 45 minutes in and out
|
Re: Need help t-5 5 speed trans
Wow, I knew these weren't the strongest transmissions, but I didn't know they were that bad. I'm glad I decided not to use one behind my 4.3. I was afraid this might happen and I would be out the cost of the clutch and flywheel.
|
All times are GMT -4. The time now is 11:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com