2wd to 4wd
 

I have an 86 crew cab 3/4 ton 2wd.I have a chance to buy an 82 3/4 ton 4x4 suburban. Will all the brackets and crossmembers fit my frame?

Re: 2wd to 4wd
 

WOW!!! I must be doing something no one else has ever done!!! It's so amazing everyone is speechless!!!!

Re: 2wd to 4wd
 

This sway its not the most common thing to do and a few people have done it, just gotta search around. Anyways, I did this swap and found some differences. I was trying to swap 4x4 3/4 suburban brackets/crossmembers/etc to a 3/4 ton 2wd drive frame. The height between the frame rails was different and the rear hangers off a suburban will be different. You'll need them off a pickup, 3/4 ton or 1/2 ton will work. Its still work in progess, but heres the tread. I suggest measuring before you purchase, but the rear brackets will be different.


http://67-72chevytrucks.com/vboard/s...d.php?t=222438

Re: 2wd to 4wd
 

Thanks for the heads up.. I can use the hangers thats already on the p/u. Thanks again.

Re: 2wd to 4wd
 

4x4 and 2wd pickup rear hangers are different.

Re: 2wd to 4wd
 

You can use the stock hangers on the rear of the truck now, but will have to lift it 3-4 more inches to sit level.

I did a 4wd swap to my 89 crew. Used 1/2 hangers for the rear, and B52 kit up front. Front has 4" springs and 6-7" long shackles, rear has stock 1 ton springs, small lift build into the spring perch, and about a 2-3" lift from a shackle flip.