The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Steering Column Wiring 70 GMC (https://67-72chevytrucks.com/vboard/showthread.php?t=378792)

Dustydog

12-31-2009 08:39 PM

Steering Column Wiring 70 GMC

2 Attachment(s)

I am installing a tilt column from a 72 Chevy in my 70 GMC. The main connector is the same. There is a long grey wire with a connector on the end that I did not have on my old column. Does anyone know where this goes?

Thanks for your help,
Dusty

john	12-31-2009 08:49 PM

Re: Steering Column Wiring 70 GMC

1 Attachment(s)

The grey goes to the cluster feed on your fuse box, Tilts have a bulb rather than fibre-optic.

Dustydog

12-31-2009 08:51 PM

Re: Steering Column Wiring 70 GMC

Awesome!
Thanks!!!!!

Sammy

12-31-2009 08:53 PM

Re: Steering Column Wiring 70 GMC

Pics are blurry, hard to tell. But the additional wire not in the plug should be for the tranny gear selector illumination. I believe there are two types one that has a plug to fit into the one of the dash panel (fiber optic type) and the other type may plug into the fuse box.

Dustydog

12-31-2009 11:41 PM

Re: Steering Column Wiring 70 GMC

Plug it in as John suggested and it works fine!

Thanks!

Dusty

All times are GMT -4. The time now is 01:09 PM.