![]() |
60-66 4x4 engine mounts
Does anyone have pictures of what the motor mounts look like on 60-66 3/4 ton 4x4, in paticular a 63. The 63 i just got has only one and it looks like a home made job. Any suggestions on replacements? I was thinking of using a cross member out of a 73-87 4x4 and modifiing it as needed.
|
Re: 60-66 4x4 engine mounts
1 Attachment(s)
I will try to get out and get some better pics, but I do have a 63 3/4 ton v8 4x4
|
Re: 60-66 4x4 engine mounts
Thanks i will lookforward to seeing them!
|
Re: 60-66 4x4 engine mounts
http://www.persh.org/pickup/perches.htm
down towards the bottom of the page. the one there has the extra brkt attached for a 6 cyl they are hard to find for a 230,250 or 283 eng as I looked for years. idid install one from a 67 which is a complete crossmember. I would advise putting that in if you are going to remove the crossmember at the bellhousing area for an a/tran 456chevy may have the stk perches for you. the ones for a 292 are different from the others ron |
Re: 60-66 4x4 engine mounts
my 60 had a 283 with a horseshoe mount at the front of the block and a crossmember with left and right mounts at the transmission, but nothing at the left and right of the motor. I just swapped the drivetrain from a 80 and now have a crossmember with left and right monts at the motor and a crossmember at the transfer cas with one mount in the middle.
|
Re: 60-66 4x4 engine mounts
http://img18.imageshack.us/img18/2682/dscn1706.jpg
By rondavid, shot with E8800 at 2009-03-04 this is the 67 frt mount and crossmember installed in my 64 ron |
Re: 60-66 4x4 engine mounts
3 Attachment(s)
Here is a pair removed, sand-blasted and powder-coated.
|
Re: 60-66 4x4 engine mounts
Quote:
|
Re: 60-66 4x4 engine mounts
They are the same for K10 & K20 trucks of the same year.
|
All times are GMT -4. The time now is 03:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com