![]() |
Installing a different size rearend
Hi i got a rearend i want to get to work with trailing arms its a different diameter than the regular 3 in does any one make a kit for this has anyone done this
|
Re: Installing a different size rearend
The only one I know is ECE's trailing arm mount. I wonder if you could modify them to work?
|
Re: Installing a different size rearend
you're talking about the weld-on perches, right? I think CPP sells them in different diameters for different rear ends- I could be wrong though- check out their website.
OK, I looked at their website- they do have them-BUT only show them for 3" axle tubes- so maybe contact Jeff and see if they can make you something? |
Re: Installing a different size rearend
Yeah right now i just wana be able to bolt the rear up
|
Re: Installing a different size rearend
Dont forget about the panhard bar which the factory rear end has a bung cast onto the houseing.... you can always go to a weld on panhard bar but it has to be in there. If you are going to a different 10 bolt or 12 bolt, we do have a panhard bar bracket that relocates the bar further down to correct its positioning for a lowered ride height. The axle brackets are gravey... you could even get in touch with Mosier for some replacments to weld onto a different rear end.
|
Re: Installing a different size rearend
Thanks alot ill check with them
|
All times are GMT -4. The time now is 03:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com