WTB: 6cyl Factory Tach Wiring Harness (open to 8 cyl wiring)
 

Looking for a factory wiring harness from a 6 cyl. tach setup, so if anything, I can determine the length of the leads needed. The 6 cyl. wiring harness will be longer than its similar 8 cyl. wiring harness due to the coil being half way up the right side of the motor vs. at the rear.

If someone can provide a measurement of the wiring that would even work.

Thanks in advance!
Nate

Re: WTB: 6cyl Factory Tach Wiring Harness
 

I just took the V8 harness that I bought out to the dump truck; it has more than enough length for my 292.
The coil wire is about 67" from the end of the coil wire to the firewall plug.

Re: WTB: 6cyl Factory Tach Wiring Harness
 

Wow... that's exactly what I was looking for.

Thanks for the info! I contacted M&H Wiring (IIRC) and they were looking for some specs to build on.

No need to buy one unless someone has one laying around or if you have any pictures on how the wire was routed.

Re: WTB: 6cyl Factory Tach Wiring Harness
 

bttt... open to nice original 8cyl tach wiring as well.