Un-needed parts
 

**** NEW PARTS ADDED DAILY!!! ****

I just picked up a 72 4 x 4 Blazer project that was in proces of being converted to a 2WD. I'm going to continue to convert it to a 68 2WD, :D, so I have been sorting through the parts that I won't need . I'll add to the list as I go. Here's what I got so far:

*** Added parts: ***

68 steering wheel with horn button - $75 + shipping
Chrome vent windows, green glass, good seals - $100 + shipping
67 Chrome vent windows - $125

Complete 4 x 4 engine cradle - $50 shipped
small block stands - $30 + shipping
67 front fenders - very straight need minor rust repair - $100 for both (no shipping)
69-72 front fenders - very straight no rust - $150 for pair (no shipping)
Good set of complete 72 front parking lights (housings, pigtails, lenses) - $40 shipped
73-87 steering wheel - $40 shipped
71/72 bumper straight with nice chrome - $100 (no shipping)

Used hei + cap - $30 shipped
73 BB motor mounts - $60 shipped
4 x 4 blazer front and rear driveshafts $75 apiece or $125 for both + shipping
Dual electric fan setup (both checked good when powered up) - $30 + shipping
Th 350 auto shift linkage - $30 shipped



***** SOLD ****

Nice ac control panel with cables (no pitting) - ** SOLD Lynfield **
L/R A/C balls with center vent - ** Sold USMCcheyv **
Sport mirrors - ** SOLD BIGREDBEAST **(1 looks like a fairly new aftermarket, the other looks original (chrome is so so))
New a/c glove box - SOLD BIGREDBEAST **
Van tilt, b/u switch relocated - Sold
Original 69-72 black steering wheel, worn but no cracks - SOLD
CST 72 gas pedal, with cable and brackets - $45 shipped


Complete 72 inner and outer grill shell with hood latch, support bracket, side braces (L&R), emblem, and headlight trim. The plastic the egg carton has no cracks at all. The emblem is really nice. I don't think this is original, but it looks really good. The only bend in the outer trim is on the bottom and should be able to be straightened well enough that the bumper would hide it. ** Sold - Southern C10 **

69-72 core support minor rust below the battery box but no rust through - ** SOLD MAK71 **
NOS tail light trim, - ** SOLD KILLER71 **
Nice 4 x 4 auto high hump - ** SOLD GMGUY **
Tailgate handle relocator kit - ** SOLD Wancosc356 **

Re: Un-needed parts
 

I need that grille. Shipping would probably kill it anyway. Got pics of the fans? Nice score on the parts.

Re: Un-needed parts
 

Boardmember 71burb is coming down in the next week to get some parts. He lives north of Birmingham. I'm sure he wouldn't mind bringing it back with him. Pics of the fan and other parts. LMK.

r/

Re: Un-needed parts
 

Hey Rob. Any pics of the tailgate handle relocator kit?

Re: Un-needed parts
 

Rob. 71burb lives in Canada according to his profile. I will take the grille if I can get the guy you are talking about to pick it up.

Brian.

Re: Un-needed parts
 

Mike here's a couple pictures.

Here's his profile:

http://www.67-72chevytrucks.com/vboa...er.php?u=41240

Jason is a cool guy and I'm sure he won't mind taking it back with him. I'm not sure when he's coming down, but it will be in the next week or two. If not, I'll be up in Montgomery within the next month.

Re: Un-needed parts
 

Thanks man. Any idea what brand it is?

Re: Un-needed parts
 

I'm not sure Mike. I tried googling the numbers on it, but got nothing back. The main panel is galvanized and the whole setup looks solid.

R/

Re: Un-needed parts
 

Oh ok. Is the handle and mechanism steel or plastic?

Re: Un-needed parts
 

Rob,

I PMd him so I will let you know. I will pass on the fans. Not sure if I will need them.

Brian.

Re: Un-needed parts
 

Handle is cast metal, not plastic. Everthing else is steel.

Sounds good.

Re: Un-needed parts
 

I am interested in the fan and the hei distributor. Can you get a quote on shipping to 69101? Does the hei have a coil? Also do you have any plug wires to go with it?

Re: Un-needed parts
 

I'll take it. PM sent.

Re: Un-needed parts
 

Rob, do you need a factory 2wd frame? We bought the one in okla.
Paul and Jason

Re: Un-needed parts
 

I'll take the auto shift linkage if it is complete from column to trans. and for 4wd.

Re: Un-needed parts
 

No wires, just the distributor, cap and coil.

Edit: I just noticed that the electric fan shroud has a couple of breaks on the shield. I think these can be easily repaired. I will do both for $80 total shipped.

R/

PM sent.

PM sent.

Here's a picture of what I have.

Re: Un-needed parts
 

Payment send for tailgate handle relocator kit. Thanks man.

Re: Un-needed parts
 

I ended up with another distributor that I had checked on earlier. I will pass on both. Thanks for the price quote.

Re: Un-needed parts
 

I'm in for the ac glove box...shipped to 80138. Got any exterior mirrors?

Re: Un-needed parts
 

Your welcome!

I'll go $70 shipped if you change your mind.

Thanks. What style?

Re: Un-needed parts
 

Rob,

Jason replied and he will pick up the grille. PM me your paypal info.

Brian.

Re: Un-needed parts
 

Hi, Rob...

Exterior mirrors...I have a '72 Blazer CST. Doors were punched for the smaller, rectangular mirrors. But, I'd be happy with the smaller tripod mirrors too...whatcha got?

Dave

Re: Un-needed parts
 

Cool. PM sent.

Let me see what I have.

R/

Re: Un-needed parts
 

Rob, can you give me the measurments on the fans please....

Re: Un-needed parts
 

Rob,

Payment sent for grille.

Brian.