The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - 15 inch wheel on 3/4 ton axles (https://67-72chevytrucks.com/vboard/showthread.php?t=392199)

78swest

03-14-2010 10:58 PM

15 inch wheel on 3/4 ton axles

i know its possible i have seen it but what do i need to do to make it work hub grinding? anybody?

Meatman

03-14-2010 11:09 PM

Re: 15 inch wheel on 3/4 ton axles

This is for Dana 60, but it might give you somewhat of an idea.

http://coloradok5.com/d60calipergrind.shtml

ghettoluxury

03-15-2010 12:56 PM

Re: 15 inch wheel on 3/4 ton axles

You gave to grind a little bit off of the calipers, mainly the casting flash. I used this oppertunity to make my calipers completely smooth, but that was just for a custom look. If you still have drum brahes on the back then you won't have to do anything to them.
http://i211.photobucket.com/albums/b...ck/vaca012.jpg

All times are GMT -4. The time now is 07:03 AM.