cab patches f/s
 

http://img.photobucket.com/albums/v3...h/100_2445.jpgi have a cab i am cutting up for patches if you see a piece you need i will try to cut it and price it . it has a good radio patch $45.00 shipped cut at glove box & dash bezel. it has some good windshied patches and other good patches.

Re: cab patches f/s
 

Re: cab patches f/s
 

Re: cab patches f/s
 

Re: cab patches f/s
 

how good is the floor area?

Re: cab patches f/s
 

How much for the roof skin shipped to 75024?

Re: cab patches f/s
 

floor and roof has some good places . can you all send me a pic of what you need?

Re: cab patches f/s
 

well i can't really take a pic since i'm at work but i kind of used your pic to show you the area i am needing for both sides. basicly a couple inches in front of the seat mounting area all the way to the rear wall

Re: cab patches f/s
 

Bill is the cowl good. If so I will wants some patches where they rust on both sides near the corners on the firewall side
thanks

Re: cab patches f/s
 

indianpride77 pass side looks ok i will have to check drivers side. i say $50.00 a side plus about $30.00 a side for shipping to wa.
pound41 i will try to check them out sunday.

Re: cab patches f/s
 

indianpride i may have to send them grayhound and i have to drive 1 hour 15 mins one way to get there.

Re: cab patches f/s
 

http://img.photobucket.com/albums/v3...100_2446-1.jpg
68laydout is this the piece you need ?

Re: cab patches f/s
 

ok i'm going to have to pass for now and hope they are still available down the road. i really hate unexpected things happening. sry about that Jimmy

Re: cab patches f/s
 

http://img.photobucket.com/albums/v3...h/100_2462.jpg
drivers side floor not as nice as pass side but pertty soild.
thats ok jimmy we all have things come up.

Re: cab patches f/s
 

http://img.photobucket.com/albums/v3...h/100_2463.jpg
drivers side firewall.

Re: cab patches f/s
 

http://img.photobucket.com/albums/v3...h/100_2464.jpg
pass side firewall.

Re: cab patches f/s
 

Bill, I may be coming up to get the windshield and bumper this Saturday (27th) if you'll be home--- My cab is rusted bad at the very bottom in the back (lower lip, in between cab corners)- how is this part on this cab? and how much would you want for it? I'll pick it up then as well, if it's good, and the price is good - let me know, thanks!

Re: cab patches f/s
 

Bill,

I need the entire rear window lower metal - I have rust in both corners extending out about 1 foot from each side underneath where the windshield rubber covers. Is that part in good shape?

Thanks,
Greg

Re: cab patches f/s
 

http://img.photobucket.com/albums/v3...100_2077-1.jpgmike this sat is ok to pick up parts. is the ligh blue high lighted piece in pic. what you need?
brownge is the red high lighted piece you need?

Re: cab patches f/s
 

I cant see the pics here at work, but I'll check it out at home tonight, Thanks! I'll give you a call and get directions sometime before Saturday.

Re: cab patches f/s
 

Yes, but I only need the part under the window rubber - if it could be cut about 2 inches under the where the gasket sits and up about 3 inches in each corner that would be perfect. It could be cut in half to make it easier to ship.

Thanks,
Greg

Re: cab patches f/s
 

I marked up one of the other pics to show the part I need.

Re: cab patches f/s
 

ok mike
brownge hows $35.00 shipped to you sound for that piece?

Re: cab patches f/s
 

Bill, yeah thats the spot- BUT the outside is where it's rusted through, the exterior panel between the cab corners. Dont know if you can seperate that part, or if you have to cut it out with the inner panel (really I could use both if you had to cut it that way) I have new cab corners, but it's all rusted out behind them (inside the cab) - Thanks brother!

Re: cab patches f/s
 

http://img.photobucket.com/albums/v3...h/100_2477.jpg
greg i have your pieces cut boxed up ready to ship. i will pm you my paypal in a few mins.