VA cab patches f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 03-20-2010, 01:12 AM

i have a cab i am cutting up for patches if you see a piece you need i will try to cut it and price it . it has a good radio patch $45.00 shipped cut at glove box & dash bezel. it has some good windshied patches and other good patches.

billsbowtie · 03-20-2010, 01:13 AM

billsbowtie · 03-20-2010, 01:14 AM

billsbowtie · 03-20-2010, 01:15 AM

indianpride77 · 03-20-2010, 01:33 PM

how good is the floor area?

68laydout · 03-20-2010, 02:03 PM

How much for the roof skin shipped to 75024?

billsbowtie · 03-20-2010, 02:50 PM

floor and roof has some good places . can you all send me a pic of what you need?

indianpride77 · 03-20-2010, 03:03 PM

well i can't really take a pic since i'm at work but i kind of used your pic to show you the area i am needing for both sides. basicly a couple inches in front of the seat mounting area all the way to the rear wall

**pound41** · 03-20-2010, 07:55 PM

Bill is the cowl good. If so I will wants some patches where they rust on both sides near the corners on the firewall side
thanks

billsbowtie · 03-20-2010, 09:55 PM

indianpride77 pass side looks ok i will have to check drivers side. i say $50.00 a side plus about $30.00 a side for shipping to wa.
pound41 i will try to check them out sunday.

billsbowtie · 03-20-2010, 09:56 PM

indianpride i may have to send them grayhound and i have to drive 1 hour 15 mins one way to get there.

billsbowtie · 03-20-2010, 10:17 PM

68laydout is this the piece you need ?

indianpride77 · 03-21-2010, 01:24 PM

ok i'm going to have to pass for now and hope they are still available down the road. i really hate unexpected things happening. sry about that Jimmy

billsbowtie · 03-21-2010, 08:12 PM

drivers side floor not as nice as pass side but pertty soild.
thats ok jimmy we all have things come up.

billsbowtie · 03-21-2010, 08:12 PM

drivers side firewall.

billsbowtie · 03-21-2010, 08:13 PM

pass side firewall.

Mike J · 03-21-2010, 09:44 PM

Bill, I may be coming up to get the windshield and bumper this Saturday (27th) if you'll be home--- My cab is rusted bad at the very bottom in the back (lower lip, in between cab corners)- how is this part on this cab? and how much would you want for it? I'll pick it up then as well, if it's good, and the price is good - let me know, thanks!

brownge · 03-22-2010, 09:39 AM

Bill,

I need the entire rear window lower metal - I have rust in both corners extending out about 1 foot from each side underneath where the windshield rubber covers. Is that part in good shape?

Thanks,
Greg

billsbowtie · 03-22-2010, 01:14 PM

mike this sat is ok to pick up parts. is the ligh blue high lighted piece in pic. what you need?
brownge is the red high lighted piece you need?

Mike J · 03-23-2010, 08:10 AM

I cant see the pics here at work, but I'll check it out at home tonight, Thanks! I'll give you a call and get directions sometime before Saturday.

brownge · 03-23-2010, 10:13 AM

Yes, but I only need the part under the window rubber - if it could be cut about 2 inches under the where the gasket sits and up about 3 inches in each corner that would be perfect. It could be cut in half to make it easier to ship.

Thanks,
Greg

brownge · 03-23-2010, 10:19 AM

I marked up one of the other pics to show the part I need.

billsbowtie · 03-23-2010, 12:13 PM

ok mike
brownge hows $35.00 shipped to you sound for that piece?

Mike J · 03-23-2010, 12:49 PM

Bill, yeah thats the spot- BUT the outside is where it's rusted through, the exterior panel between the cab corners. Dont know if you can seperate that part, or if you have to cut it out with the inner panel (really I could use both if you had to cut it that way) I have new cab corners, but it's all rusted out behind them (inside the cab) - Thanks brother!

billsbowtie · 03-24-2010, 12:13 AM

greg i have your pieces cut boxed up ready to ship. i will pm you my paypal in a few mins.

03-20-2010, 01:12 AM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	cab patches f/s i have a cab i am cutting up for patches if you see a piece you need i will try to cut it and price it . it has a good radio patch $45.00 shipped cut at glove box & dash bezel. it has some good windshied patches and other good patches. __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 01:13 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 01:14 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 01:15 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 01:33 PM	#5
indianpride77 Registered User Join Date: Oct 2009 Location: lacey,wa Posts: 63	Re: cab patches f/s how good is the floor area?

03-20-2010, 02:03 PM	#6
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	Re: cab patches f/s How much for the roof skin shipped to 75024?

03-20-2010, 02:50 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s floor and roof has some good places . can you all send me a pic of what you need? __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 03:03 PM	#8
indianpride77 Registered User Join Date: Oct 2009 Location: lacey,wa Posts: 63	Re: cab patches f/s well i can't really take a pic since i'm at work but i kind of used your pic to show you the area i am needing for both sides. basicly a couple inches in front of the seat mounting area all the way to the rear wall Attached Images

03-20-2010, 07:55 PM	#9
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Re: cab patches f/s Bill is the cowl good. If so I will wants some patches where they rust on both sides near the corners on the firewall side thanks

03-20-2010, 09:55 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s indianpride77 pass side looks ok i will have to check drivers side. i say $50.00 a side plus about $30.00 a side for shipping to wa. pound41 i will try to check them out sunday. __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 09:56 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s indianpride i may have to send them grayhound and i have to drive 1 hour 15 mins one way to get there. __________________ i have 67/72 chevy truck parts f/s.

03-20-2010, 10:17 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s 68laydout is this the piece you need ? __________________ i have 67/72 chevy truck parts f/s.

03-21-2010, 01:24 PM	#13
indianpride77 Registered User Join Date: Oct 2009 Location: lacey,wa Posts: 63	Re: cab patches f/s ok i'm going to have to pass for now and hope they are still available down the road. i really hate unexpected things happening. sry about that Jimmy

03-21-2010, 08:12 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s drivers side floor not as nice as pass side but pertty soild. thats ok jimmy we all have things come up. __________________ i have 67/72 chevy truck parts f/s.

03-21-2010, 08:12 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s drivers side firewall. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

03-21-2010, 08:13 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s pass side firewall. __________________ i have 67/72 chevy truck parts f/s.

03-21-2010, 09:44 PM	#17
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: cab patches f/s Bill, I may be coming up to get the windshield and bumper this Saturday (27th) if you'll be home--- My cab is rusted bad at the very bottom in the back (lower lip, in between cab corners)- how is this part on this cab? and how much would you want for it? I'll pick it up then as well, if it's good, and the price is good - let me know, thanks! __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

03-22-2010, 09:39 AM	#18
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: cab patches f/s Bill, I need the entire rear window lower metal - I have rust in both corners extending out about 1 foot from each side underneath where the windshield rubber covers. Is that part in good shape? Thanks, Greg

03-22-2010, 01:14 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s mike this sat is ok to pick up parts. is the ligh blue high lighted piece in pic. what you need? brownge is the red high lighted piece you need? __________________ i have 67/72 chevy truck parts f/s.

03-23-2010, 08:10 AM	#20
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: cab patches f/s I cant see the pics here at work, but I'll check it out at home tonight, Thanks! I'll give you a call and get directions sometime before Saturday. __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

03-23-2010, 10:13 AM	#21
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: cab patches f/s Yes, but I only need the part under the window rubber - if it could be cut about 2 inches under the where the gasket sits and up about 3 inches in each corner that would be perfect. It could be cut in half to make it easier to ship. Thanks, Greg

03-23-2010, 10:19 AM	#22
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: cab patches f/s I marked up one of the other pics to show the part I need. Attached Images Last edited by brownge; 03-23-2010 at 10:21 AM. Reason: adding picture

03-23-2010, 12:13 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s ok mike brownge hows $35.00 shipped to you sound for that piece? __________________ i have 67/72 chevy truck parts f/s.

03-23-2010, 12:49 PM	#24
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: cab patches f/s Bill, yeah thats the spot- BUT the outside is where it's rusted through, the exterior panel between the cab corners. Dont know if you can seperate that part, or if you have to cut it out with the inner panel (really I could use both if you had to cut it that way) I have new cab corners, but it's all rusted out behind them (inside the cab) - Thanks brother! __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

03-24-2010, 12:13 AM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s greg i have your pieces cut boxed up ready to ship. i will pm you my paypal in a few mins. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.