The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   removing steering column (https://67-72chevytrucks.com/vboard/showthread.php?t=393668)

tanner 03-23-2010 11:16 AM

removing steering column
 
how do you remove the steering column on a 71k5 blazer

ChevLoRay 03-23-2010 11:25 AM

Re: removing steering column
 
It should come out like mine did in my '69 2wd.

Disconnect it at the rag joint on the steering sector. There's a clamp on the firewall (engine side) of the column. There's 4 bolts, if I remember, holding the column to the bottom side of the dash. Oh, there's an electrical connector between the backside of the dash and the inside of the firewall. I'd do that item, first....so I didn't forget. If you have a column shifter, you'll have to disconnect it, too. If it is an automatic, there will be a "tab" that holds the linkage to the transmission. If it is a manual (3 on the tree), there should be 2 linkages to disconnect.

If anyone sees that I muffed this advice, please chime in and help a bud.

Schwinn68 03-23-2010 11:51 AM

Re: removing steering column
 
I'm subscribing as I'm going to have to do this very soon too.


All times are GMT -4. The time now is 12:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com