The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   You Guy May Hate Me For This.... (https://67-72chevytrucks.com/vboard/showthread.php?t=396858)

DWright 04-10-2010 10:41 PM

You Guy May Hate Me For This....
 
3 Attachment(s)
i just picked this and one more like it up yesterday. its a surprise 50th birthday gift to my father. he's big into the the rat rod thing and i decided that a ratty ford powered by a chevy would fit the bill. this truck will be getting my old faithful 6 cylinder and 3-speed tranny, a good lowered stance and maybed a power disc setup. the goal is to have it moving by mid-July. so, tell me what you Really think.

steverino66 04-10-2010 10:58 PM

Re: You Guy May Hate Me For This....
 
I'm not a F**d guy at all, but that's a cool-looking truck. I like the 53-56 F-100s even better - almost traded one of my Chevys for one recently (truck was too far away)

bubba327 04-10-2010 11:07 PM

Re: You Guy May Hate Me For This....
 
Nice score!!! I am glad to see old iron restored no matter the brand!!
Take lots of pictures and put a build thread in The Alternative Tinkerings section here on the forum for us all to see!! Hope your dad loves it and drives it like he stole it!!.

DWright 04-10-2010 11:22 PM

Re: You Guy May Hate Me For This....
 
1 Attachment(s)
i pulled the original flathead v8 out yesterday evening to rebuild and replace this '53's blown and cracked engine

DWright 04-10-2010 11:25 PM

Re: You Guy May Hate Me For This....
 
oh and did i mention that i got these trucks for $300? the otherone has some kinda chrysler v8 in it. does anyone know what old-skool chrysler v8 had alluminum heads?

GruntMoanCough 04-10-2010 11:59 PM

Re: You Guy May Hate Me For This....
 
I think that's really mean to buy a Furd for your Dad, JK. :)
But, I Really think that'll be nice gift for your Dad. Good luck!

scotts62 04-11-2010 12:11 AM

Re: You Guy May Hate Me For This....
 
Thats the only way to make those ferds run is to put Chevy power in it ;)

Cool sounds like a cool project!

DWright 04-11-2010 12:20 AM

Re: You Guy May Hate Me For This....
 
Thats right! shhh....you guys hear that? its the sound of a ford rusting nearby...

markeb01 04-11-2010 12:53 AM

Re: You Guy May Hate Me For This....
 
It's great you'd want to build something for your dad. I've had my eye on many F1's and F100's over the years, along with quite a few Advance Design Chevys. Just never found a good enough deal to put one in my driveway. I'd never pass up anything I liked because of brand loyalty, for me it's too restricting. I buy whatever makes me happy.

The last truck I bought was a 68 F250 for my wife. It was an immaculate one owner cherry, and she loved the truck. The only problem I ever had with the truck was I hated working on it. Since I'm fundamentally a Chevy guy, anything needing attention seemed to take twice as much effort to fix.

62 Bowtie 04-11-2010 02:59 AM

Re: You Guy May Hate Me For This....
 
I think your dads lucky to have a cool son like you good score :metal:

ruffrida2005 04-11-2010 03:52 AM

Re: You Guy May Hate Me For This....
 
As long as it's old Iron it's cool with me.

63 & 64 Bowties 04-11-2010 08:13 AM

Re: You Guy May Hate Me For This....
 
Quote:

Originally Posted by DWright (Post 3912942)
i pulled the original flathead v8 out yesterday evening to rebuild and replace this '53's blown and cracked engine

Cracked? That's too bad cuz those flatheads are getting hard to find, and they're bringing some serious coin.

Rich 5150 69 04-11-2010 10:49 AM

Re: You Guy May Hate Me For This....
 
[QUOTE]As long as it's old Iron it's cool with me.
__________________
Paul/QUOTE]

Ditto here...!

DWright 04-11-2010 11:23 AM

Re: You Guy May Hate Me For This....
 
Quote:

Originally Posted by markeb01 (Post 3913060)
It's great you'd want to build something for your dad. I've had my eye on many F1's and F100's over the years, along with quite a few Advance Design Chevys. Just never found a good enough deal to put one in my driveway. I'd never pass up anything I liked because of brand loyalty, for me it's too restricting. I buy whatever makes me happy.

The last truck I bought was a 68 F250 for my wife. It was an immaculate one owner cherry, and she loved the truck. The only problem I ever had with the truck was I hated working on it. Since I'm fundamentally a Chevy guy, anything needing attention seemed to take twice as much effort to fix.

As long as i'm wrenching on classic iron i dont care who's it is or what make it is. Plus, when i was about 12 years old my dad got rid of his '65 bbw short fleet so he could pay for christmas and then 3 years later sold his '66 thunderbird for the same reason. i tried to buy back the t-bird when i was about 17 but got ripped off to the tune of $2000 and ended up with no money and no car. And as far as me being a cool son for doing this; i feel its the other way around. i was lucky to have a father that would make those sacrifices for his kids. And I've never been one to favor one particular brand over another, i've owned mavericks, rivieras, camaros, chevelles, dodge trucks, ect.; whatever tickles my fancy at the time.

Shaky 04-11-2010 11:54 AM

Re: You Guy May Hate Me For This....
 
Like old Fords ('40s and '50s). They lost me in the '60s. I remember being a teenager and going to an electrical shop and seeing a Ford starter chart on the wall. :ack::eek::thud:

DWright 04-11-2010 10:38 PM

Re: You Guy May Hate Me For This....
 
the fun parts going to be figuring a way to mount the 250 in there... time to break out the tubing and welder...

oldblu65 04-12-2010 12:48 PM

Re: You Guy May Hate Me For This....
 
The 250 will mount just like a SBC if you use the original adapters that go between the engine and the motor mounts . They should already be on the 250 in your truck . Go to www.speedwaymotors.com . They sell a variety of universal motor mount and finding one to fit Chevy 6 into the Ferd shouldn't be a problem . Simply use one that adapts a SBC to the model Ferd you have . Good luck !

DWright 04-12-2010 12:58 PM

Re: You Guy May Hate Me For This....
 
I dont know why i didnt think of that.. i receive the speedway catalogs religiously. i think i may end up using the tube style mount that goes from rail to rail with the sbc perches on it. thnks for reminding me!:uhmk:

bill2509 04-12-2010 05:29 PM

Re: You Guy May Hate Me For This....
 
1 Attachment(s)
Fords are cool, but not a chevy, :bann: So I sold this one to build my 64 Short Wide, But the chevy power will help!!


All times are GMT -4. The time now is 01:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com