You Guy May Hate Me For This.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DWright · 04-10-2010, 10:41 PM

i just picked this and one more like it up yesterday. its a surprise 50th birthday gift to my father. he's big into the the rat rod thing and i decided that a ratty ford powered by a chevy would fit the bill. this truck will be getting my old faithful 6 cylinder and 3-speed tranny, a good lowered stance and maybed a power disc setup. the goal is to have it moving by mid-July. so, tell me what you Really think.

steverino66 · 04-10-2010, 10:58 PM

I'm not a F**d guy at all, but that's a cool-looking truck. I like the 53-56 F-100s even better - almost traded one of my Chevys for one recently (truck was too far away)

bubba327 · 04-10-2010, 11:07 PM

Nice score!!! I am glad to see old iron restored no matter the brand!!
Take lots of pictures and put a build thread in The Alternative Tinkerings section here on the forum for us all to see!! Hope your dad loves it and drives it like he stole it!!.

DWright · 04-10-2010, 11:22 PM

i pulled the original flathead v8 out yesterday evening to rebuild and replace this '53's blown and cracked engine

DWright · 04-10-2010, 11:25 PM

oh and did i mention that i got these trucks for $300? the otherone has some kinda chrysler v8 in it. does anyone know what old-skool chrysler v8 had alluminum heads?

**GruntMoanCough** · 04-10-2010, 11:59 PM

I think that's really mean to buy a Furd for your Dad, JK.

But, I Really think that'll be nice gift for your Dad. Good luck!

**scotts62** · 04-11-2010, 12:11 AM

Thats the only way to make those ferds run is to put Chevy power in it

Cool sounds like a cool project!

DWright · 04-11-2010, 12:20 AM

Thats right! shhh....you guys hear that? its the sound of a ford rusting nearby...

markeb01 · 04-11-2010, 12:53 AM

It's great you'd want to build something for your dad. I've had my eye on many F1's and F100's over the years, along with quite a few Advance Design Chevys. Just never found a good enough deal to put one in my driveway. I'd never pass up anything I liked because of brand loyalty, for me it's too restricting. I buy whatever makes me happy.

The last truck I bought was a 68 F250 for my wife. It was an immaculate one owner cherry, and she loved the truck. The only problem I ever had with the truck was I hated working on it. Since I'm fundamentally a Chevy guy, anything needing attention seemed to take twice as much effort to fix.

62 Bowtie · 04-11-2010, 02:59 AM

I think your dads lucky to have a cool son like you good score

ruffrida2005 · 04-11-2010, 03:52 AM

As long as it's old Iron it's cool with me.

63 & 64 Bowties · 04-11-2010, 08:13 AM

Quote:

Originally Posted by DWright

i pulled the original flathead v8 out yesterday evening to rebuild and replace this '53's blown and cracked engine

Cracked? That's too bad cuz those flatheads are getting hard to find, and they're bringing some serious coin.

Rich 5150 69 · 04-11-2010, 10:49 AM

[QUOTE]As long as it's old Iron it's cool with me.
__________________
Paul/QUOTE]

Ditto here...!

DWright · 04-11-2010, 11:23 AM

Quote:

Originally Posted by markeb01

It's great you'd want to build something for your dad. I've had my eye on many F1's and F100's over the years, along with quite a few Advance Design Chevys. Just never found a good enough deal to put one in my driveway. I'd never pass up anything I liked because of brand loyalty, for me it's too restricting. I buy whatever makes me happy.

The last truck I bought was a 68 F250 for my wife. It was an immaculate one owner cherry, and she loved the truck. The only problem I ever had with the truck was I hated working on it. Since I'm fundamentally a Chevy guy, anything needing attention seemed to take twice as much effort to fix.

As long as i'm wrenching on classic iron i dont care who's it is or what make it is. Plus, when i was about 12 years old my dad got rid of his '65 bbw short fleet so he could pay for christmas and then 3 years later sold his '66 thunderbird for the same reason. i tried to buy back the t-bird when i was about 17 but got ripped off to the tune of $2000 and ended up with no money and no car. And as far as me being a cool son for doing this; i feel its the other way around. i was lucky to have a father that would make those sacrifices for his kids. And I've never been one to favor one particular brand over another, i've owned mavericks, rivieras, camaros, chevelles, dodge trucks, ect.; whatever tickles my fancy at the time.

Shaky · 04-11-2010, 11:54 AM

Like old Fords ('40s and '50s). They lost me in the '60s. I remember being a teenager and going to an electrical shop and seeing a Ford starter chart on the wall.

DWright · 04-11-2010, 10:38 PM

the fun parts going to be figuring a way to mount the 250 in there... time to break out the tubing and welder...

oldblu65 · 04-12-2010, 12:48 PM

The 250 will mount just like a SBC if you use the original adapters that go between the engine and the motor mounts . They should already be on the 250 in your truck . Go to www.speedwaymotors.com . They sell a variety of universal motor mount and finding one to fit Chevy 6 into the Ferd shouldn't be a problem . Simply use one that adapts a SBC to the model Ferd you have . Good luck !

DWright · 04-12-2010, 12:58 PM

I dont know why i didnt think of that.. i receive the speedway catalogs religiously. i think i may end up using the tube style mount that goes from rail to rail with the sbc perches on it. thnks for reminding me!

bill2509 · 04-12-2010, 05:29 PM

Fords are cool, but not a chevy,

So I sold this one to build my 64 Short Wide, But the chevy power will help!!

04-10-2010, 10:41 PM	#1
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	You Guy May Hate Me For This.... i just picked this and one more like it up yesterday. its a surprise 50th birthday gift to my father. he's big into the the rat rod thing and i decided that a ratty ford powered by a chevy would fit the bill. this truck will be getting my old faithful 6 cylinder and 3-speed tranny, a good lowered stance and maybed a power disc setup. the goal is to have it moving by mid-July. so, tell me what you Really think. Attached Images __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-10-2010, 10:58 PM	#2
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: You Guy May Hate Me For This.... I'm not a F**d guy at all, but that's a cool-looking truck. I like the 53-56 F-100s even better - almost traded one of my Chevys for one recently (truck was too far away)

04-10-2010, 11:07 PM	#3
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: You Guy May Hate Me For This.... Nice score!!! I am glad to see old iron restored no matter the brand!! Take lots of pictures and put a build thread in The Alternative Tinkerings section here on the forum for us all to see!! Hope your dad loves it and drives it like he stole it!!. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

04-10-2010, 11:22 PM	#4
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: You Guy May Hate Me For This.... i pulled the original flathead v8 out yesterday evening to rebuild and replace this '53's blown and cracked engine Attached Images __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-10-2010, 11:25 PM	#5
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: You Guy May Hate Me For This.... oh and did i mention that i got these trucks for $300? the otherone has some kinda chrysler v8 in it. does anyone know what old-skool chrysler v8 had alluminum heads? __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-10-2010, 11:59 PM	#6
GruntMoanCough Registered User Join Date: May 2009 Location: Pemberton, BC Posts: 1,075	Re: You Guy May Hate Me For This.... I think that's really mean to buy a Furd for your Dad, JK. But, I Really think that'll be nice gift for your Dad. Good luck! __________________ My goal in life is to be as good a person as my dog already thinks I am - Unknown

04-11-2010, 12:11 AM	#7
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: You Guy May Hate Me For This.... Thats the only way to make those ferds run is to put Chevy power in it Cool sounds like a cool project! __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 04-11-2010 at 12:12 AM. Reason: oops

04-11-2010, 12:20 AM	#8
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: You Guy May Hate Me For This.... Thats right! shhh....you guys hear that? its the sound of a ford rusting nearby... __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-11-2010, 12:53 AM	#9
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: You Guy May Hate Me For This.... It's great you'd want to build something for your dad. I've had my eye on many F1's and F100's over the years, along with quite a few Advance Design Chevys. Just never found a good enough deal to put one in my driveway. I'd never pass up anything I liked because of brand loyalty, for me it's too restricting. I buy whatever makes me happy. The last truck I bought was a 68 F250 for my wife. It was an immaculate one owner cherry, and she loved the truck. The only problem I ever had with the truck was I hated working on it. Since I'm fundamentally a Chevy guy, anything needing attention seemed to take twice as much effort to fix. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 Last edited by markeb01; 04-11-2010 at 01:06 AM.

04-11-2010, 02:59 AM	#10
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: You Guy May Hate Me For This.... I think your dads lucky to have a cool son like you good score

04-11-2010, 03:52 AM	#11
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: You Guy May Hate Me For This.... As long as it's old Iron it's cool with me. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-11-2010, 10:49 AM	#13
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: You Guy May Hate Me For This.... [QUOTE]As long as it's old Iron it's cool with me. __________________ Paul/QUOTE] Ditto here...! __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

04-11-2010, 11:54 AM	#15
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: You Guy May Hate Me For This.... Like old Fords ('40s and '50s). They lost me in the '60s. I remember being a teenager and going to an electrical shop and seeing a Ford starter chart on the wall. __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce

04-11-2010, 10:38 PM	#16
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: You Guy May Hate Me For This.... the fun parts going to be figuring a way to mount the 250 in there... time to break out the tubing and welder... __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-12-2010, 12:48 PM	#17
oldblu65 Registered User Join Date: Jul 2005 Location: " The Scenic City " Posts: 189	Re: You Guy May Hate Me For This.... The 250 will mount just like a SBC if you use the original adapters that go between the engine and the motor mounts . They should already be on the 250 in your truck . Go to www.speedwaymotors.com . They sell a variety of universal motor mount and finding one to fit Chevy 6 into the Ferd shouldn't be a problem . Simply use one that adapts a SBC to the model Ferd you have . Good luck ! Last edited by oldblu65; 04-12-2010 at 12:50 PM. Reason: spELin /



Register or Log In To remove these advertisements.

04-12-2010, 12:58 PM	#18
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: You Guy May Hate Me For This.... I dont know why i didnt think of that.. i receive the speedway catalogs religiously. i think i may end up using the tube style mount that goes from rail to rail with the sbc perches on it. thnks for reminding me! __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-12-2010, 05:29 PM	#19
bill2509 Registered User Join Date: Jan 2010 Location: Tulsa OKlahoma Posts: 114	Re: You Guy May Hate Me For This.... Fords are cool, but not a chevy, So I sold this one to build my 64 Short Wide, But the chevy power will help!! Attached Images

Register or Log In To remove these advertisements.