The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   air fittings help (https://67-72chevytrucks.com/vboard/showthread.php?t=398955)

72GREENC10 04-23-2010 02:55 PM

air fittings help
 
does anyone know any local stores like hd, lowes, ace hardware, harbor freight ect, where i can get fittings for my tank? and where i can get 1/4 air line?

thx. cj

michael bustamante 04-23-2010 03:22 PM

Re: air fittings help
 
air fittings Ive been having pretty good luck with lowes or home depot, (compression fittings, not pushloc)but USE the BRASS FITTINGS!!. Those plastic ones seem to have a bad rep here.
as for 1/4 line, you will be best off going to a truck store for that, Ive been going to freightliner myself.
Oh and if youre going to use guages, The only place I could find 4 way fittings is at ace hardware, or a plumbers supply

royo 04-23-2010 04:48 PM

Re: air fittings help
 
Look in your phone book for a FleetPride, Truck pro, Or world wide equipment they will have what your looking for on hand

http://www.fleetpride.com/fp_c/loc07_info.html

Shane 04-24-2010 10:15 AM

Re: air fittings help
 
Not sure if they have stores in your area, but our local FASTENAL has a really good selection of Push To Lock fittings.

If you are located close to a larger city you may want to look thru the yellow pages for a Parker Store. They WILL definitely have what you need.

smashingchuck 04-24-2010 05:11 PM

Re: air fittings help
 
also Grainger

lolife99 04-26-2010 06:30 PM

Re: air fittings help
 
X2 on Fastenal!
Just make sure they are DOT approved fittings.
Our local store had to order them,... but it only took a couple of days.

colin_havens 04-26-2010 08:24 PM

Re: air fittings help
 
I bought all of my puch to lock fittings from NAPA. The local store when I lived right outside Memphis had them in stock. All brass, and a solid seal on DOT line. Be prepared thought as they werent cheap, but maybe thats because I used all 1/2 inch fittings and line :)


All times are GMT -4. The time now is 03:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com