The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   stock sway bar question (https://67-72chevytrucks.com/vboard/showthread.php?t=402038)

skeeterbug 05-11-2010 07:36 AM

stock sway bar question
 
i have a 71 1/2 ton lwb just wondering if an 73 3/4 ton heavy duty front sway bar will work on my truck with no mods?

N2TRUX 05-11-2010 10:26 AM

Re: stock sway bar question
 
Yes it will fit. You will need to get the correct bushings if you replace them, everything else should bolt up.

skeeterbug 05-11-2010 12:18 PM

Re: stock sway bar question
 
thanks n2trux, my truck did not have a factory swaybar or was removed by the po. which bushings are you speaking of exactly as the correct ones?

michael bustamante 05-11-2010 05:19 PM

Re: stock sway bar question
 
I have a 78 3/4 ton sway bar on mine with my original brackets and new bushings from o reillies, worked, no problem

N2TRUX 05-11-2010 08:49 PM

Re: stock sway bar question
 
skeeterbug I misread your post. I thought you were upgrading to a C-20 bar. The bushing I referred to are the ones that are clamped at the frame. In your case you will have the correct size bushing.


All times are GMT -4. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com