The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Recommendation for plugs (https://67-72chevytrucks.com/vboard/showthread.php?t=402287)

72tutone

05-12-2010 11:49 AM

Recommendation for plugs

Can anyone recommend some plugs for a bone stock 350? I need to buy some plugs and wires and I am looking for any good recommendations.

Also is there an easy way to determine on the distrib if its running points, or if it has been upgraded?

Thanks!

dauntless_powered

05-12-2010 01:33 PM

Re: Recommendation for plugs

I have always run what the service manual calls for in my case (283) its ac delco R45's. As far at the dist, pull the cap and rotor, you should either see a set of points or an elctronic upgrade in there. Should be very easy to check out

gonzo6869

05-12-2010 09:47 PM

Re: Recommendation for plugs

I used AC Delco on my 350, sorry I don't have a part number on me right now. If you have an HEI you will want to gap them at 45 otherwise you'll gap them at 35.

All times are GMT -4. The time now is 11:58 AM.