watts link
 

Anybody in here running a watts link, I `m thinking of building one and using the rear axle center pin as the pivot point, and making the out board ends adjustable...anybody see a problem with the offset of the locating pin on the axle....?

Re: watts link
 

If you're talking about using the panhard bar stud on the differential, I don't think it will work since it is at a little bit of an angle.

There has been some discussion on here before about Watts links. You might try a search both here and in the suspension forum.

Re: watts link
 

This thread may give you some ideas:

http://67-72chevytrucks.com/vboard/s...2watts+link%22

And here's another thread on if this should be the preferred solution:

http://67-72chevytrucks.com/vboard/s...2watts+link%22

Re: watts link
 

***************** has a really nice Watts link kit.
http://www.*****************/4-link-k...-universal-kit

Re: watts link
 

Thanks guys, I`m giving this some thought...