The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - Fuel Gauge (https://67-72chevytrucks.com/vboard/showthread.php?t=406911)

63panel

06-10-2010 12:17 PM

Fuel Gauge

Ok guys,all of you that are doing an AD to a S-10 frame swap,what are you doing about a fuel gauge.What I mean is how do you get the 90 ohm sending to work with the 30 ohm fuel gauge.I can't find any original type gauges for 90 ohms.

Fred T

06-11-2010 12:03 AM

Re: Fuel Gauge

It's my understanding that you will have to modify the sending unit. This company says they can do it, but I know nothing about them. http://www.classicinstruments.com/in...lgaugesandtank

poncho_villa

06-11-2010 12:16 AM

Re: Fuel Gauge

I reused my sender unit. I just relocated to the new tank and installed fresh wires. I had to bend the float pickup a little.

raycow

06-11-2010 05:49 AM

Re: Fuel Gauge

You can fix the problem from the other end too. The outfits that repair dash gauges can replace or rewind the stock coils so the gauge will work with a 90 ohm sender.

Ray

All times are GMT -4. The time now is 12:31 AM.