HELP, Pressure plate to flywheel bolt
 

I'm not sure which bolts I have to attach the pressure plate to flywheel. (This project has been siiting for 10 years). The Chevy dealer doesn't have any in stock either. The only 6 that I have alike is in the pic below. Is this the correct bolt?

Also, any installation tips would be appreciated. With the non-threaded shank do I just tighten until they bottom out?
It's been a few years, and I want to make sure I get it in right.

Thanks for the help..

sorry, forgot the pic.

those look to be the proper bolt, but need a lock washer. here is a link to summit(arp bolts,& pretty cheap) http://store.summitracing.com/partdetail.asp?part=10047 you should also be able to get them in a Dorman @ a local auto parts . the threads dont come all the wat to the top in the flywheel(holes are counterdrilled).....crazyL :bowtie:

Thanks CrazyL you're a big help. What is the Dorman that you refer to?

Dorman is the brand name, I think i found them @ O Rieleys last time in the perf hardware section . You might also find them in a MR gasket @ a local speed shop. Good luck...crazyL