Custom Billet Aluminum Dash Panels
I am going to try and do something differet with my gauge panels. I have had time to sit down with my programmer and we have come up with a way to be able to make a viable way to make the gauge panel in different configurations while using the same tooling.
So here it goes, We will be able to start making the dash panels in custom configurations and even make a blank panel wiith no holes for someone seeking to do their own work. The only limitation is you have to use the original center points for the gauges. Meaning I am going to change the diameter of the opening and the number of holes you want. I will not move the gauge openings to different locations. I will delete the openings and lettering for the windshield wipers and headlights upon request. But for this first round I will need to get a group to commit to this project so I don't get stuck doing one or two at a time. I will need at least 10 buyers. The price is going to be $295.00 per panel and I am going to need a $125.00 deposit. Once I get 10 people commited and I have approved their designs then I will collect the deposits and begin working on them and keep those buyers informed of the progress. Then I will collect the balance when the units are ready to be shipped. Price will include ground shipping and CA residents have to add sales tax. For Reference you can look at these othere threads for the different panels I have made. http://67-72chevytrucks.com/vboard/s...d.php?t=252902 http://67-72chevytrucks.com/vboard/s...d.php?t=374791 Please contact me through my email at ryan.hubbard@aspencontrols.com or through the forum pm. I will post updates of how many people have committed and will make a cutoff date once I see we have enough people committed. Thanks for your continued interest and for those who have bought units in the past. |
Re: Custom Billet Aluminum Dash Panels
Hey there,
Newbe here... Tried to PM Ryan but it said his box was full. Does anyone know if his dash panels are still available? Thanks, Jonathan |
Re: Custom Billet Aluminum Dash Panels
Welcome to the forum Jonathan :thumbs:
Have you tried sending him an email to the address he listed above? Quote:
|
Re: Custom Billet Aluminum Dash Panels
Hey Capt'n
Thank you for the welcome and reply. I did email him twice and tried to PM (his PM box was full). Looking to get the dash w/instruments soon so I can install my 5.3 and wire harness... Oh, just realized that you're the guy with the brackets for the wilwood D52 rear calipers- nice. Are the brackets still available? Thanks again and will be posting pics of my resto Jonathan |
Re: Custom Billet Aluminum Dash Panels
Yes I still sell them......
Quote:
|
Re: Custom Billet Aluminum Dash Panels
Are these still an option?
|
Re: Custom Billet Aluminum Dash Panels
Quote:
|
Re: Custom Billet Aluminum Dash Panels
Last Activity: Today 10:35 AM
Looks like he is still here , I really want these too , just not ready for them yet.. |
Re: Custom Billet Aluminum Dash Panels
Yeah I'd really like to have a set too.
|
Re: Custom Billet Aluminum Dash Panels
I am still here but I am not able to do any panels at the moment. I won some big contacts and have all my machines tied up for the next 3 years. I am trying to work out buying more machines but since the panels is a side job, I am not looking to run panels until I have a decent size run going. I still have some of the original panels left and glovebox doors.
|
Re: Custom Billet Aluminum Dash Panels
What do you have left left? I'm looking for the 5" outers with the 3 3/8" center, none of the lower four holes.
|
Re: Custom Billet Aluminum Dash Panels
i second that i want a cluster and glove box
but i want mine simal to stock setup |
Re: Custom Billet Aluminum Dash Panels
I still have instock and ready to ship gauge panels that are setup to take two 5" Autometer gauges and five 2 1/16" autometer gauges. I also have some that will take two 5" Autometer gauges and one 3 3/8" Autometer gauge in the center and four 2 1/16" gauges along the bottom. These are available for $350 with a billet glove box door or for $225 for just the dash panel.
|
Re: Custom Billet Aluminum Dash Panels
Quote:
|
Re: Custom Billet Aluminum Dash Panels
Quote:
Posted via Mobile Device |
Re: Custom Billet Aluminum Dash Panels
Anything for 73-79 in the future ?
|
Re: Custom Billet Aluminum Dash Panels
Quote:
|
Re: Custom Billet Aluminum Dash Panels
Quote:
|
Re: Custom Billet Aluminum Dash Panels
so $125 for a glovebox?
|
Re: Custom Billet Aluminum Dash Panels
Quote:
|
Re: Custom Billet Aluminum Dash Panels
Ryan, If you still have some left I will take 1 dash panel with the two 5" Autometer gauges and five 2 1/16" autometer gauges setup and a billet glove box lid. If so how do you take payment and I will get it out as soon as I hear from you! Mike
|
Re: Custom Billet Aluminum Dash Panels
Quote:
|
Re: Custom Billet Aluminum Dash Panels
Ryan, $350 submitted through paypal for both items. My paypal (ebay) username is "tvpowdercoating"
If the address does note show on the payment transaction let me know. Thanks, Mike |
Re: Custom Billet Aluminum Dash Panels
Received payment and the parts will ship tomorrow.
Posted via Mobile Device |
Re: Custom Billet Aluminum Dash Panels
wow what an awesome product thanks so much very nice workmanship
|
All times are GMT -4. The time now is 09:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com