The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Welcome Area (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=50)

- - EZ Wiring , how easy? (https://67-72chevytrucks.com/vboard/showthread.php?t=409537)

MotiV-8r

06-28-2010 12:58 PM

EZ Wiring , how easy?

Finished body work/primer, dropped in engine/trans (both rebuilt) finally feeling confident on progress , removed dash cluster only to find a _rapy wire harness
install! (Ms.Smith 1st.grade class work) Another mountain- advice & help appreciated

scotts62

06-28-2010 05:48 PM

Re: EZ Wiring , how easy?

Welcome from OKC! They are not too bad just take your time and route them where you want them before you cut. :chevy:

Bpokey

06-28-2010 06:40 PM

Re: EZ Wiring , how easy?

Used E-Z wiring on mine and it wasn't too bad. Wires are labeled well but you will have to solder on some terminals. I had to engineer a way for the wires to go through the cab because there is no bulkhead connector. I haven't had any problems since I put it in though.

All times are GMT -4. The time now is 06:24 PM.