The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Has anyone put a 95 or newer dash in a 73-87 truck? (https://67-72chevytrucks.com/vboard/showthread.php?t=410395)

(541)COLD_beer 07-04-2010 03:36 AM

Has anyone put a 95 or newer dash in a 73-87 truck?
 
looking for anyone who has done this and pics.

68 TT 07-04-2010 09:29 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Quote:

Originally Posted by (541)COLD_beer (Post 4072621)
looking for anyone who has done this and pics.

A couple guys tried putting the 99-up Silverado dash into a square body and made them fit but it left too little room for the driver as the dash is quite a bit deeper.

In one of the threads somebody posted a pic of a 95-? vintage dash they had put in a square body and it looked like it fit well. Can't remember what year it was exactly but I bet if you searched for the thread that has the Silverado dash swap in it that one might have it. The thread is less than a year old so that can narrow your search down a little.

78 Chevyrado 07-04-2010 12:46 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
I have no idea about the specifics, but heres a pic I found somewhere.

http://i160.photobucket.com/albums/t...ate90sdash.jpg

(541)COLD_beer 07-04-2010 01:17 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
thanks guys thats what i was looking for... think im going to go for it

dropd80s 07-04-2010 05:46 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Just make sure you have power windows. I saw a 95+ dash in a 73-87 suburban a while back with manual windows and you had to open the door to roll them down. The Cranks hit the dash lol.

(541)COLD_beer 07-04-2010 05:55 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Quote:

Originally Posted by dropd80s (Post 4073319)
Just make sure you have power windows. I saw a 95+ dash in a 73-87 suburban a while back with manual windows and you had to open the door to roll them down. The Cranks hit the dash lol.

haha that would suck... i have the power windows though so im good

(541)COLD_beer 07-04-2010 06:22 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Quote:

Originally Posted by 78 Chevyrado (Post 4072947)
I have no idea about the specifics, but heres a pic I found somewhere.

http://i160.photobucket.com/albums/t...ate90sdash.jpg

do you have anymore pics of this truck?

baclay9 07-04-2010 06:41 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Looks pretty crowded. Hope your slim. It does look good though.

78 Chevyrado 07-04-2010 06:43 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Quote:

Originally Posted by (541)COLD_beer (Post 4073363)
do you have anymore pics of this truck?

No sorry thats the only one i ever saw.

Cherub 07-04-2010 06:54 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
yea crowded in the knee area forsure

87chevy.com 07-04-2010 08:55 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
i remember that truck.... bought the magazine just becuase of it... nice, im going to see if i can find the link. He also put the same style front bumper on the front.. looked sick. So would you get a discount on the car insurance for having a truck with an airbag?? lol.
clint

87chevy.com 07-04-2010 09:01 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
this is your lucky day... well this is the truck, the mag i bought... doesnt show all the pictures but you have something to oogle..
http://www.truckinweb.com/features/0...uck/index.html

silvereagle07 07-05-2010 07:28 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
That's a sweet looking truck. I like the look of the newer bumper up front.

N2TRUX 07-05-2010 10:14 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
It's a nice truck, but the seats and ash make the interior very cramped. I saw it at a car show, and realized a "full figure" kinda guy would not fit well.

68 TT 07-05-2010 10:17 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Quote:

Originally Posted by 78 Chevyrado (Post 4072947)
I have no idea about the specifics, but heres a pic I found somewhere.

http://i160.photobucket.com/albums/t...ate90sdash.jpg

That is the pic I was thinking about. From the article it is from a 98 dually.

(541)COLD_beer 07-05-2010 12:10 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
do you guys think its crowded because of the seats? those new seats sit higher and push you forward more. i think even if you cut the rails down you still need to cut the floor pan to get it to sit in the right spot. and you really cant do much about it pushing you forward... im doing it in a crew cab so i think i can get away with having the dash and the seat all out of my 97 chevy.

baclay9 07-05-2010 12:21 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
If you are putting it in a crew I doubt you will have a problem with room. Make sure you do a build thread.

87chevy.com 07-05-2010 12:48 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
probally cold do some seat floor pan work if you reloacated the gas tank to the rear. other than that theres no way to mod the floor pan.

(541)COLD_beer 07-05-2010 01:07 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
1 Attachment(s)
Quote:

Originally Posted by 87chevy.com (Post 4074422)
probally cold do some seat floor pan work if you reloacated the gas tank to the rear. other than that theres no way to mod the floor pan.

true... i kinda like what this guy is doing but he has alot of work into it but i guess there is going to be alot of work in swapping dashes. we'll see i change my mind almost daily on how im going to build my truck:banghead::b69:

(541)COLD_beer 07-05-2010 01:13 PM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
Quote:

Originally Posted by baclay9 (Post 4074383)
If you are putting it in a crew I doubt you will have a problem with room. Make sure you do a build thread.

i'll start one as soon as i can start working on it we just had our second daughter a month ago and i have noooooooo time to do anything right now but be a good daddy/ husband

(541)COLD_beer 02-02-2011 02:57 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
3 Attachment(s)
heres some pic on how its going...

(541)COLD_beer 02-02-2011 03:04 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
3 Attachment(s)
more pics

(541)COLD_beer 02-02-2011 03:08 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
2 Attachment(s)
and some more

(541)COLD_beer 02-02-2011 03:11 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
2 Attachment(s)
more

(541)COLD_beer 02-02-2011 03:18 AM

Re: Has anyone put a 95 or newer dash in a 73-87 truck?
 
going to start a build thread soon on this project


All times are GMT -4. The time now is 11:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com