The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   What to use for lower radiator hose? (https://67-72chevytrucks.com/vboard/showthread.php?t=417416)

chevydog66 08-19-2010 11:19 PM

What to use for lower radiator hose?
 
I've installed my 6.0 for the last time finally. I have the 99 upper radiator hose, but what are you guys using for the lower?

glock35ipsc 08-20-2010 09:49 AM

Re: What to use for lower radiator hose?
 
I used both the upper and lower hoses that came on the 5.3l. Both fit like a glove, and the lower was practically the same shape as the truck's original hose.

chevydog66 08-20-2010 10:29 AM

Re: What to use for lower radiator hose?
 
What year 5.3? Should I get a 99 just like the upper?

soule64 08-20-2010 10:45 AM

Re: What to use for lower radiator hose?
 
I used the stock 350 hose that was originally in the truck. I had to trim it down a little, but it also fit very well

chevydog66 08-20-2010 10:50 AM

Re: What to use for lower radiator hose?
 
Quote:

Originally Posted by soule64 (Post 4148767)
I used the stock 350 hose that was originally in the truck. I had to trim it down a little, but it also fit very well

Ya, I mocked it up, and considered cutting off some on the water pump side.

Clyde65 08-20-2010 11:10 AM

Re: What to use for lower radiator hose?
 
could I see some pictures please? the angle of the waterpump and radiator is extreme imo and my stock lower hose kinked pretty bad so I used a flex hose which I dont like, please show me what you did

glock35ipsc 08-20-2010 11:26 AM

Re: What to use for lower radiator hose?
 
This is the hose off of the 2006 engine. I imagine they would be the same from 99-07 at least. I also trimmed a little off the water pump end. I could have used either this hose or the one off of the small block, but this one was in much better shape, so I used it. Fits perfect with no kinks.

http://i191.photobucket.com/albums/z...P1010168-2.jpg

http://i191.photobucket.com/albums/z...00418-1651.jpg

chevydog66 08-20-2010 11:32 AM

Re: What to use for lower radiator hose?
 
Kewl, thanks again Glock.

chevydog66 08-20-2010 07:44 PM

Re: What to use for lower radiator hose?
 
I bought 1 for a 02 and since I have a/c already in my truck the inlet and outlet of the radiator is bigger, therefore I really had to stretch the hoses to get them on. what a pita.

Clyde65 08-21-2010 01:32 PM

Re: What to use for lower radiator hose?
 
glock, how wide is ur radiator, I have the stock 65 and it is only like 25" wide so the lower hose is really contorted.

OKGMC4 08-21-2010 07:06 PM

Re: What to use for lower radiator hose?
 
1 Attachment(s)
Ya, how wide is the radiator? I found the perfect one for my 56 but it's a narrow radiator. 21710 Gates, but the 90 degree turn on the end has to be cut off.

glock35ipsc 08-22-2010 11:45 PM

Re: What to use for lower radiator hose?
 
It's about 28.5" inside the tanks. It's the truck's original radiator.


All times are GMT -4. The time now is 07:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com