front coil help
 

so i put my stock suspension back on rear was flipped and the front had drop coils i got the back done to day but it sits really high i know that the rear from factory was higher my question is how much to i have to raise the front to level it out im putting my stock coils back but i know that wont cut it

Re: front coil help
 

Try a set of C20 coils. They might get you close to level.

Re: front coil help
 

sorry for got to mention my truck is a 1983 chevy c20 2wd

Re: front coil help
 

Hmm, maybe a C30 coil then. I'm not much of an expert on lifting them. Ask me how to lower and I got ya covered.

Re: front coil help
 

i just want to level things out front and rear

Re: front coil help
 

anyone know what i should do?

Re: front coil help
 

Install a 2" shackel. The rear is 2" higher from the factory. Shackels are cheap. You could also flip the front hanger. Flipping the front hanger may drop it more than 2".

Re: front coil help
 

so if i install a front 2" coil spacer id be good too

Re: front coil help
 

I think a 1ton/diesel front coils would bring the front up if you have a gas 350..

My 1/2ton 2wd sat level with only 1ton front coils.

Also... you do not want to put a 2" spacer on the front coils. Due to geometry all you need is about a 3/4"-1" spacer to get 2-2.5" of lift.

Re: front coil help
 

No drop the rear. It's easier.

Re: front coil help
 

No.... lift it it looks better. :lol:

Re: front coil help
 

ok guys i only wanna do this once how much of a lift spacer with my stock spring do i need to level it out

Re: front coil help
 

put heavy duty 1 ton coil springs with a 1 inch spacer. worse case scenario you need to add a block in back...

Re: front coil help
 

i just want to get a coil spacer just dont know witch size

Re: front coil help
 

Bump

Re: front coil help
 

than i would say 2 inch spacer. make sure your balljoints are in good shape.

Re: front coil help
 

2" drop shackles

Re: front coil help
 

Ok so im going to get a 2" coil spacer for the front any heads up while installing my old coils back

Re: front coil help
 

to be honest just buy 1 ton coils while you have the springs out.... still put the spacer in, besides that just be careful with coil springs.

Re: front coil help
 

why get 1 ton coils ?

Re: front coil help
 

because they have a higher spring rate and it will make the truck sit taller.

Re: front coil help
 

well if i only need 2" and im putting 2" coil spacers if i put the 1 ton springs id be to tall

Re: front coil help
 

"Lifting" a 2wd truck is not as easy as it has been made to sound. There is only so much "droop" travel in the front suspension to begin with and adding coils spacers w/o taking this travel limit into account is a problem. I wouldn't bet on the 1 ton springs doing much more than making the ride unbearable.

You really are better off to lower the rear to match the front with the new "stock" coils up front.

Re: front coil help
 

ok guys so i dropped the lower control arm and i compressed the spring and tryed to shove the spring in but it just seems i cant compress the spring enough im stuck and need some help any one have tips and even if i do compress the spring enough i just cant get the compressor out

Re: front coil help
 

anyone i need help guys