Need some pictures of center bolt covers
 

I am looking for ideas on running the plug wires using a center bolt valve cover. IF you have this application can you please post up your set up

Re: Need some pictures of center bolt covers
 

The yellow bowtie looks cool. :metal:Sold Here
http://www.thunderracing.com/catalog/summaries/s447.jpg

Re: Need some pictures of center bolt covers
 

On my Ramjet 350 we ran them down and back.

Re: Need some pictures of center bolt covers
 

great ideas.
I cant run the center bolt holders as the covers I have, the bolt head is sunk in the cover to mount flush.
I would need to fab some sort of holder and mount it to a open intak bolt. or run down and then back. But then I would need to shield the wires from the head heat.

Re: Need some pictures of center bolt covers
 

I run mine under the headers with little plastic clamps, works good and much cleaner being hidden IMO.

http://i85.photobucket.com/albums/k5...383/383056.jpg

Re: Need some pictures of center bolt covers
 

here's what i used.their a little hard to see.but,i get compliments on em.they also sell a adapter plate thingy ma jig that allows you to run traditional pattern.but,it's spendy.

Re: Need some pictures of center bolt covers
 

Here's what I ended up using

Re: Need some pictures of center bolt covers
 

I like that.....:cool:

Re: Need some pictures of center bolt covers
 

I think I might try this.... the clips are the basic ones I assume. How did you mount them under the headers?

Re: Need some pictures of center bolt covers
 

My plug wires look terrible

Re: Need some pictures of center bolt covers
 

Yep they are just basic wire separators. There's a small unused threaded hole on each side of the block that I screwed a 1"x3" piece of aluminum sheet metal to, they keep the wires against the block and away from the headers. Been on there that way for 35k miles and haven't come close to hurting a wire.

Re: Need some pictures of center bolt covers
 

i ran them under the headers, nothing fancy.

Re: Need some pictures of center bolt covers
 

Well all I tried to run the wires down but they come way to close to the headers. I would have to run sleeves or something on the wires. Anyone can post the venders that they purchased the looms from? I called summit and jegs no luck.

running a pair of headers I had at the garage not sure the brand....