The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   GMC Headlight Bezels (https://67-72chevytrucks.com/vboard/showthread.php?t=428976)

Big Fenders 11-02-2010 10:53 AM

GMC Headlight Bezels
 
Iv'e got a 1960 GMC and need headlight bezels [quad lights]. Will headlight bezels from a 1962 with quad lights fit??Finding parts for this GMC a lot harder than my 63 Chevy but that's half the fun..
Bob

markeb01 11-02-2010 02:13 PM

Re: GMC Headlight Bezels
 
The GMC grille and headlight bezels are the same from 60-66. The only thing that changed in that period was the grille letters in 66, which became square and had a red stripe.

jbgroby 11-02-2010 06:32 PM

Re: GMC Headlight Bezels
 
Big Fenders,

I too have the '60 and one thing I've noticed is that when we mount the headlights to the bucket and then use new after market headlight rings (they hold the bulbs in place) and you use the adjuster screws I seem to have a hard time getting the dual caps/Cover in place.

I don't know if I'm doing something wrong or what but I had a devil of a time getting them to fit and sit right. Anyone else had this happen?

Big Fenders 11-02-2010 09:27 PM

Re: GMC Headlight Bezels
 
Thanks guys for the help...I do know that there are two tab and three tab headlight rings that hold the bulb...I have one bucket that doesn't belong on my vehicle so that s another part for me to look for.
Bob

markeb01 11-02-2010 09:54 PM

Re: GMC Headlight Bezels
 
Quote:

Originally Posted by jbgroby (Post 4273589)
Big Fenders,

I too have the '60 and one thing I've noticed is that when we mount the headlights to the bucket and then use new after market headlight rings (they hold the bulbs in place) and you use the adjuster screws I seem to have a hard time getting the dual caps/Cover in place.

I don't know if I'm doing something wrong or what but I had a devil of a time getting them to fit and sit right. Anyone else had this happen?

I always have a very hard time getting my passenger side headlight rim back in place. It's because the original owner hit a deer and damaged the eyebrow over the passenger side headlights, and mangled the headlight mounting pan. I replaced the pan and all of the alignment adjusters, but the deformed eyebrow was repaired with about 10 pounds of lead and still causes an interference fit. I have a mint original grille I was saving to chrome, but have grown to prefer the white grille and bumper. When weather permits it will get painted and installed solving the fit problem. The aftermarket retaining rings could be too big, but there could also be a minor deflection in either the grille or the headlight rim adding to the problem as well.


All times are GMT -4. The time now is 03:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com