The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Warn Winch (https://67-72chevytrucks.com/vboard/showthread.php?t=431920)

tanman722001

11-21-2010 02:38 PM

Warn Winch

I have a Model 8274 Warn winch.Does anyone have a wiring diagram for it?I cant figure out how to wire it up.Thanks Tony

jamesi20

11-21-2010 03:50 PM

Re: Warn Winch

look here http://www.offroadexpress.co.nz/Foru...php?f=4&t=4924

tanman722001

11-21-2010 06:52 PM

Re: Warn Winch

I was hoping to find a wire diagram with two solinoids.So i would have to get 4 from Warn for over 400.Can i use any other type solinoids?

crushermechanic

11-21-2010 11:33 PM

Re: Warn Winch

you can use a ferd remote starter solenoid. thay will handle the load.

Vintage Windmills

11-22-2010 02:06 AM

Re: Warn Winch

You need more than 2 solenoids unless they are double pole. This is assuming you have to reverse the motor (or does it just freespool out?) How many amps? Check Surplus center website (lincoln nebraska one) or Bailey Sales. 400 is ridiculous. I'm wiring up a winch now with some solenoids i have. There just basic single pole ones (so I need 4). My dad saved a bunch from a scrap pile. I built my winch myself. Maybe I'll make a thread about it in a tool forum.

tanman722001

11-30-2010 06:30 PM

Re: Warn Winch

How would i do the battery?I was thinking about putting it under the hood.How do i wire a second battery?So it will charge?

Jacfourteen

11-30-2010 08:24 PM

Re: Warn Winch

Quote:

Originally Posted by crushermechanic (Post 4307233)

you can use a ferd remote starter solenoid. thay will handle the load.

That's what I was thinking, You can get them real cheap at the junk yard.

Guess F@rds are good for something :lol:

All times are GMT -4. The time now is 12:36 PM.