Control arm shaft hardware
 

Anyone know where can I find the hardware for the post-73 style control arm shafts? I'm looking for some 'new' freshly plated hardware for my a-arms (just the washers & nuts that keep the shaft bushings in place).

Re: Control arm shaft hardware
 

Vernons alignment in Ft Worth will have it and if not Randy will get it or tell you where to get it 817 737 5801

Re: Control arm shaft hardware
 

when I did mine a few months back, I ordered new GM nuts and powdercoated the stock washers.

Re: Control arm shaft hardware
 

What about these guys?
http://www.totallystainless.com/

Re: Control arm shaft hardware
 

1st place I checked but they list complete packages vs independent pieces. I have a catalog I'm going to sort through & see if they break down farther than what the web indicates. I figured it would be worth asking on here to see if there were possibly any 'local' alternatives.

Thanks....

Re: Control arm shaft hardware
 

My other choice would be these guys:
http://www.gardner-westcott.com/automotive_nuts.htm
http://www.gardner-westcott.com/automotive_washers.htm

Re: Control arm shaft hardware
 

If it helps...

Nut.....6.69 each PN 9422308
Retainer (washer).....N/A PN 337940

the washers have been discontinued

Re: Control arm shaft hardware
 

I wound up getting some 'shallow' nylock style nuts for the upper a-arms @ Fastenall.

I painted the OE style washers & will add some SS washers behind the nylock nuts to keep things from getting all scratched up (whole chassis is done that way).