62 master question
 

Has anyone mesured the travel on a stock 62 master manual set up?? Bore size is 1 1/8 however I am having some issues with my hyd master for the clutch ( longer story there :) ) and the travel. SO I need to start with the basic math.. if someone has one that they can measure that would be great.

Re: 62 master question
 

Are you swaping it to a dual master and seprate clutch master or just replacing the stock one?

Re: 62 master question
 

have a hyrdo boost and using a wildwood master.. I just need travel on stock master/ hydo clutch master..

Re: 62 master question
 

oh ok .........

Re: 62 master question
 

Measure the travel of your clutch pedal from the top stop to the floor at the pushrod pivot point

Re: 62 master question
 

I went the other route and did the volume way all good .

Re: 62 master question
 

Good news, so how is the clutch master working for you?

Re: 62 master question
 

Well at this point I may end up making a new booster plate kit and having to relocate the clutch master... Will see what happens.