The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Electrical (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=64)
-   -   Wiring a '63 2-speed wiper switch (https://67-72chevytrucks.com/vboard/showthread.php?t=436328)

TagMan 12-18-2010 05:59 PM

Wiring a '63 2-speed wiper switch
 
I found a 2-speed wiper switch with a push button for windshield solvent spray. The switch has three wires: Black, light blue & dark blue. I looked in my '63 shop manual, but the only wiring diagrams are for single speed switches. This is a new installation, so there are no old wires to follow. Can anyone tell me which wire goes where?
Thanks,
-Bob

protrash64 12-21-2010 11:37 PM

Re: Wiring a '63 2-speed wiper switch
 
My truck has this option and I'll try to get the info this weekend as I'm cleaning up some wiring stuff.

TagMan 12-23-2010 05:29 PM

Re: Wiring a '63 2-speed wiper switch
 
Thanks, protrash64. I'll watch for your reply.
Thanks and Merry Christmas!
-Bob

markeb01 12-23-2010 05:50 PM

Re: Wiring a '63 2-speed wiper switch
 
Perhaps this will help:

http://www.persh.org/Pickup/Wiper-washer.htm

protrash64 12-23-2010 11:04 PM

Re: Wiring a '63 2-speed wiper switch
 
Cool link, Mark. My switch doesnt work properly. Wipers only turn on when the fluid button is pushed; sounds like it may be a grounding issue from the description.

TagMan 12-26-2010 08:34 PM

Re: Wiring a '63 2-speed wiper switch
 
Quote:

Originally Posted by markeb01 (Post 4366735)



That's exactly what I was looking for - thanks a million for helping me out!
-Bob

Alan's Classic 03-30-2012 12:20 AM

Re: Wiring a '63 2-speed wiper switch
 
Did a search and this thread came up.

I've tried using the diagram in the above thread. Persh link Does everything have to be hooked up such as the pump? I'm not gonna run a pump.

http://www.persh.org/images/65Pickup...gram-stock.JPG

I'm not getting anything. I bench checked the motor and it checked good I think. I got two speeds and park. I don't know how I did it cause I didn't have a good switch. I just unhooked wires until I got 2 speeds and park. Now the motor is in and I have a good (new) switch.

Here's my motor

http://67-72chevytrucks.com/vboard/a...1&d=1324615799

Alan's Classic 03-30-2012 07:28 PM

Re: Wiring a '63 2-speed wiper switch
 
bump for previous question.

I don't know if the wiper motor is a factory replacement, I think not.

help appreciated.

ray_mcavoy 03-31-2012 10:29 PM

Re: Wiring a '63 2-speed wiper switch
 
Hi Alan,

No, you don't need the washer pump hooked up to make the motor work.

The black w/yellow wire is a +12V feed that's live whenever the ignition switch is on.

For low speed, the switch grounds both the black and black w/blue wires.

For high speed, the switch only grounds the black w/blue wire.

Check to make sure your switch is making good electrical contact where it mounts to the dash. If the dash has been repainted it might be keeping the switch from making good contact.

Alan's Classic 03-31-2012 11:16 PM

Re: Wiring a '63 2-speed wiper switch
 
Quote:

Originally Posted by ray_mcavoy (Post 5286712)
Hi Alan,

No, you don't need the washer pump hooked up to make the motor work.

The black w/yellow wire is a +12V feed that's live whenever the ignition switch is on.

For low speed, the switch grounds both the black and black w/blue wires.

For high speed, the switch only grounds the black w/blue wire.

Check to make sure your switch is making good electrical contact where it mounts to the dash. If the dash has been repainted it might be keeping the switch from making good contact.

Thanks for the help. You might have discovered my problem. I've got the switch out laying in the floor to aid in testing. I guess I need to ground the switch body. Why didn't I think of that. :lol:

Alan's Classic 04-01-2012 12:28 AM

Re: Wiring a '63 2-speed wiper switch
 
Your the man!! I grounded the switch and what do you know it worked. Thanks again.

ray_mcavoy 04-01-2012 12:37 AM

Re: Wiring a '63 2-speed wiper switch
 
You're welcome!

Glad to hear it was a simple fix :D

1963c-10 03-24-2013 09:39 PM

Re: Wiring a '63 2-speed wiper switch
 
im doing the same conversion. my donar motor and pump came from a 63 c10, but my wire colors are different.-
Posted via Mobile Device

1963c-10 03-25-2013 10:54 AM

Re: Wiring a '63 2-speed wiper switch
 
3 Attachment(s)
Heres a few pics of my two speed wiper w/washer. Shows part # 5045342 Type E 12V delco appliances date code Jan 63


All times are GMT -4. The time now is 05:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com