I was Framed
 

BAHHAHAAA Anybody know if there is any dfferance' between a 1/2 ton frame and 3/4 or 1 ton frame.Are they the same or did they do something differant I am thinking of making another 1/2 ton truck that is sitting on a 3800 chassis would they be the same?Thanks and ya-all have a Merry Christmas

Re: I was Framed
 

from memory 3/4 is same dims as 1/2 just thicker frame metal. 1 ton may be a llittle deeper section. when I get to a computer I can post a link to place that has all the dims.
Posted via Mobile Device
missed it was an AD truck, others know more

Re: I was Framed
 

1/2 ton tapers front to rear
3/4 ton taper stops at the back of the cab then straight back
1 ton is like the 3/4

each gets a longer in the wheelbase and the frame gets heavier.

Re: I was Framed
 

also, 3/4 ton frames are a quite a bit narrower in the rear. i can pull a measurement if you would like.

so yes, longer and narrower.

Re: I was Framed
 

The 1 tons also have no axle arch, at least mine doesn't.

Re: I was Framed
 

Well here is a song for the title of your post


:four::four::four::four::four:

Re: I was Framed
 

The metal is thicker and the rails are slightly taller on the 3/4 ton.