Guys I need help with dual voice coils
 

Guys I need to know how to wire my 2 L7 dual voice Kicker subs I have a 4ohm. the amp is a kenwood 1800 watt amp model number KAC-9104D.

I need to know if these need to be in series or parallel the box are both single sealed boxes.

Re: Guys I need help with dual voice coils
 

4 ohm dvc or 2?

Here is 2 4 ohm DVC to 4 ohm load:
http://images.the12volt.com/12voltim...m_dvc_4ohm.gif

Re: Guys I need help with dual voice coils
 

It says in the book that came with the sub that 2 or 4 ohm
Posted via Mobile Device

Re: Guys I need help with dual voice coils
 

If you look at the speaker magnet, it might have the ohm rating on it. If the book says 2 or 4, then the speaker comes in 2 or 4 ohm ratings.

Here's a link that will help ya once you figure out the speaker rating: http://www.the12volt.com/caraudio/wo...igurations.asp. Just choose 2 speakers, then your ohms and click the button to see all the ways it's possible to be wired.

Re: Guys I need help with dual voice coils
 

my DVC's had a small jumper from one VC to the other then the main + and - ran to that one... worked well...

Re: Guys I need help with dual voice coils
 

What ohm load are you trying to accomplish??? And what type of amplifier do you have??? Mono block, D class, 2 channel, and the lowest ohm rating on the amp??
Posted via Mobile Device

Also, knowing what brand amplifier will help