Guys I need help with dual voice coils - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cbrown67 · 01-22-2011, 08:09 PM

Guys I need to know how to wire my 2 L7 dual voice Kicker subs I have a 4ohm. the amp is a kenwood 1800 watt amp model number KAC-9104D.

I need to know if these need to be in series or parallel the box are both single sealed boxes.

jimmydean · 01-22-2011, 09:55 PM

4 ohm dvc or 2?

Here is 2 4 ohm DVC to 4 ohm load:

Cbrown67 · 01-22-2011, 11:05 PM

It says in the book that came with the sub that 2 or 4 ohm
Posted via Mobile Device

tubbedII · 01-25-2011, 01:28 PM

If you look at the speaker magnet, it might have the ohm rating on it. If the book says 2 or 4, then the speaker comes in 2 or 4 ohm ratings.

Here's a link that will help ya once you figure out the speaker rating: http://www.the12volt.com/caraudio/wo...igurations.asp. Just choose 2 speakers, then your ohms and click the button to see all the ways it's possible to be wired.

msgross · 02-07-2011, 08:24 AM

my DVC's had a small jumper from one VC to the other then the main + and - ran to that one... worked well...

81ShrtBox · 02-07-2011, 11:05 AM

What ohm load are you trying to accomplish??? And what type of amplifier do you have??? Mono block, D class, 2 channel, and the lowest ohm rating on the amp??
Posted via Mobile Device

Also, knowing what brand amplifier will help

01-22-2011, 08:09 PM	#1
Cbrown67 Registered User Join Date: Jul 2010 Location: MASS Posts: 178	Guys I need help with dual voice coils Guys I need to know how to wire my 2 L7 dual voice Kicker subs I have a 4ohm. the amp is a kenwood 1800 watt amp model number KAC-9104D. I need to know if these need to be in series or parallel the box are both single sealed boxes.

01-22-2011, 09:55 PM	#2
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Guys I need help with dual voice coils 4 ohm dvc or 2? Here is 2 4 ohm DVC to 4 ohm load: __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

01-22-2011, 11:05 PM	#3
Cbrown67 Registered User Join Date: Jul 2010 Location: MASS Posts: 178	Re: Guys I need help with dual voice coils It says in the book that came with the sub that 2 or 4 ohm Posted via Mobile Device

01-25-2011, 01:28 PM	#4
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Guys I need help with dual voice coils If you look at the speaker magnet, it might have the ohm rating on it. If the book says 2 or 4, then the speaker comes in 2 or 4 ohm ratings. Here's a link that will help ya once you figure out the speaker rating: http://www.the12volt.com/caraudio/wo...igurations.asp. Just choose 2 speakers, then your ohms and click the button to see all the ways it's possible to be wired. __________________ 1970 2wd Blazer

02-07-2011, 08:24 AM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Guys I need help with dual voice coils my DVC's had a small jumper from one VC to the other then the main + and - ran to that one... worked well... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-07-2011, 11:05 AM	#6
81ShrtBox MadMan Join Date: Nov 2010 Location: Hammond, La. Posts: 490	Re: Guys I need help with dual voice coils What ohm load are you trying to accomplish??? And what type of amplifier do you have??? Mono block, D class, 2 channel, and the lowest ohm rating on the amp?? Posted via Mobile Device Also, knowing what brand amplifier will help __________________ 81" Shortbed C10 Full Restoration underway, who needs a budget?? LS Pro Touring Build Last edited by 81ShrtBox; 02-07-2011 at 11:19 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.