The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - What is it #2 (https://67-72chevytrucks.com/vboard/showthread.php?t=445372)

xconcepts

02-07-2011 08:17 PM

What is it #2

1 Attachment(s)

So what is this? It is below the passenger tank near the non OEM fuel line coming from the top of the tank.

russgt

02-07-2011 08:50 PM

Re: What is it #2

selector for dual tanks?

big_b

02-07-2011 09:16 PM

Re: What is it #2

that is the "y joint" you were asking about in your first what is it post.
like mentioned above that is the dual tank valve.

xconcepts

02-07-2011 09:22 PM

Re: What is it #2

So where would the lines from the drivers side tank come from? Its obviously not hooked up but I have no lines from the drivers tank.

Captkaos

02-09-2011 11:28 PM

Re: What is it #2

The drivers side feed lines run across the rear frame cross member where the body mounts are from the drivers side to that valve and only 1 set of lines go to the front.

baclay9

02-09-2011 11:45 PM

Re: What is it #2

Your fuel filter should really be between the fuel pump and carb also.

All times are GMT -4. The time now is 08:37 AM.